Differences

This shows you the differences between two versions of the page.

--- other:visual3dserver:tutorials:setup_checklist [2024/07/16 17:02] – removed sgranger
+++ other:visual3dserver:tutorials:setup_checklist [2024/07/17 15:44] (current) – created sgranger
@@ Line 1: / Line 1: @@
+====== Setup Checklist ======
+==== Before Patient's Arrival ====
+{{:Checkbox.jpg}} **Turn on ALL systems**
+{{:Checkbox.jpg}} **Verify Position and Orientation of cameras**
+Verify the position and orientation of Motion Capture Cameras
+Verify the position and orientation of Force Platforms
+Verify the position and orientation of Force Structures
+Verify the position and orientation of Obstacles or Environment objects
+{{:Checkbox.jpg}} **Perform System Calibration**
+Perform static and/or dynamic calibrations of data collection devices
+Verify results against the standards developed/referenced by your laboratory
+{{:Checkbox.jpg}} **Verify the protocol being used for the session**
+Verify the experimental protocol for the current data collection session
+{{:Checkbox.jpg}} **Set appropriate system settings**
+As per experimental protocol, set and verify system settings
+e.g. sampling rates (synchronise), marker thresholds, ranges, triggers etc.
+{{:Checkbox.jpg}} **Perform CalTester test**
+Perform Caltester test at a minimum of 2 locations on each force platform
+Verify against prior laboratory results
+{{:Checkbox.jpg}} **Prepare necessary markers and supplies**
+==== Patient's Arrival ====
+{{:Checkbox.jpg}} **Obtain informed consent**
+{{:Checkbox.jpg}} **Record subject details**
+Insure that there are no contraindications for the patient completing the data collection
+This may include data collection done via questionnaires or measurements
+If data collection includes patient questionnaires check to make sure that they have been completed correctly
+{{:Checkbox.jpg}} **Apply markers/IMUs/EMGs as per experimental protocol**
+Take a set of digital pictures of the subject for post-hoc review of the marker placement.
+{{:Checkbox.jpg}} **Record static calibration trial**
+Ensure all markers are visible
+{{:Checkbox.jpg}} **Verify recorded marker set**
+Verify recorded marker set by launching Visual3D, creating model, and applying model template appropriate for the protocol
+{{:Checkbox.jpg}} **Remove anatomical markers**
+If necessary, remove anatomical markers not needed for tracking in motion trials
+{{:Checkbox.jpg}} **Set the software system to broadcast the data**
+Each manufacturer has their own method of turning on the broadcasting option in their software
+Check your software/hardware system's user's manual for more information
+==== After Patient Leaves ====
+{{:Checkbox.jpg}} **Clean up work station**
+{{:Checkbox.jpg}} **Save data as appropriate**