Differences

This shows you the differences between two versions of the page.

--- visual3d:tutorials:kinematics_and_kinetics:force_platforms [2025/01/15 17:56] – wikisysop
+++ visual3d:tutorials:kinematics_and_kinetics:force_platforms [2025/01/15 19:42] (current) – [Practical Example] wikisysop
@@ Line 51: / Line 51: @@
 ==== Preparing for Tutorial ====
-The required material for this tutorial are contained within [[http://example.com|External Link]], containing:
+The required material for this tutorial are contained within [[https://has-motion.com/download/YouTubeTutorial/Visual3D Tutorial 5 Force Platforms.zip|Visual3D Tutorial 5 Sample Data]], containing:
   * **Tutorial5_ForcePlatforms_Start**: Used to start the tutorial, .cmz file containing the .c3d movement trial file.
   * **walkNoFpParameters**: Movement trial file containing no force platform parameters, changes made throughout the tutorial.
@@ Line 101: / Line 101: @@
 **Troubleshooting Tip:** If the ANALOG signals for the force platform exist, but the FORCE signal is zero, examine the FZ1 graph and verify that the Fz Channel of the ANALOG signals is negative. If not, then the ANALOG scale factor in the C3D file has probably been stored incorrectly by the motion capture software. The scale factor will need to be changed in the motion capture software and/or the file.
-Continue to the [[visual3d:tutorials:events:event_processing|next tutorial]].
+Continue to the [[visual3d:tutorials:events:event_processing|Event Processing]].