HAS-Motion Software Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Metric Compute DFT Coefficients ======

The Discrete Fourier Transform of a Signal

This command computes a metric signal containing the DFT coefficients and the Base Frequency.

The form of the DFT is as follows:

p(t)= p0 + p1 sin(**w** t) + p2 cos(**w** t) + p3 sin(2**w** t) + p4 cos(2 **w** t) + ....

where **w** = 2 * PI * Base_Frequency

The distinct difference between a DFT and an FFT is that the DFT allows the user the option to specify the base frequency.

This is useful if you want to compare the coefficients across trials and/or across subjects. It also means that the base frequency has physical meaning, such as stride frequency.

See also [[Visual3D:Documentation:Pipeline:Metric_Commands:Metric_Compute_Power_From_DFT_Coefficients|Compute Power from DFT coefficients]]

{{:ComputeDFTdialog.jpg}}

=== Pipeline Command ===

**Metric_Compute_DFT_Coefficients**
/SIGNAL_TYPES=
! /SIGNAL_NAMES=
! /SIGNAL_FOLDER=ORIGINAL
! /SIGNAL_COMPONENTS=ALL_COMPONENTS
! /RESULT_SUFFIX=_DFT
! /RESULT_FOLDER=DFT
!/[[Visual3D:Documentation:C3D_Signal_Types:EVENT_LABEL_Data_Type#Event_Sequence|EVENT_SEQUENCE]]=
!/[[Visual3D:Documentation:C3D_Signal_Types:EVENT_LABEL_Data_Type#Exclude_Events|EXCLUDE_EVENTS]]=
! /START_FRAME=
! /END_FRAME=
! /USE_POINT_RATE=TRUE
! /BASE_FREQUENCY=
/NUM_FREQUENCIES=4
**;**
=== Signal_Components ===

Each component of the signal will generate a metric signal containing the coefficients for that component of the signal.

=== Number of Frequencies ===

The parameter Num_Frequencies determines the number of coefficients that will be stored in the resulting metric signal.

If Num_Frequencies is empty, the number is determined consistent with a standard DFT or FFT.

Num_Frequencies = 1 + NumFrames/2

where the Maximum Number of Frequencies = 0.5*DataRate;

=== Event_Sequence ===

The [[Visual3D:Documentation:C3D_Signal_Types:EVENT_LABEL_Data_Type#Event_Sequence|Event Sequence and Exclude_Sequence]] define the range of frames used to compute the DFT coefficients

=== Base_Frequency ===

If BASE_FREQUENCY is empty,

Frequency= SamplingRate/NumberOfFrames (average per cycle per file)
Else

Frequency= Numerical value or Expression
=== Resulting Metric Signal ===

The metric signal is stored as follows (Base_Frequency, p0, p1, p2, p3, p4, ....)

The Base_Frequency and coefficients are stored as components of the signal.

If there are multiple ranges of data, there will be a "frame" or "row" for each range.

see also : [[Visual3D:Documentation:Pipeline:Metric_Commands:Metric_Compute_Power_From_DFT_Coefficients|Metric_Compute_Power_From_DFT_Coefficients]]