====== Prompt For Multiple Pipeline Parameter Values ======

Prompts a dialog for user to create multiple pipeline parameters with the specified parameter values. The command details are below:

<code>
Prompt_For_Multiple_Pipeline_Parameter_Values
/PIPELINE_PARAMETER_NAME=  The pipeline parameter name
/DATATYPE=   Data type of the parameter
! /DEFAULT_VALUE=  Default value of the parameter
! /DEFAULT_VALUE_COUNT=1 Default number of default values associated with each parameter
;
</code>

=== DEFAULT_VALUE_COUNT ===

==== Example ====

=== Example1 ===

This example will prompt the user for 2 values. The resulting pipeline parameters **PARAM1** and **PARAM2** will contain the inputs from the dialog. In this example, **PARAM1** is an INTEGER type with **1** as the default value and **PARAM2** is an INTEGER type with **2** as the default value.

|The command can be edited by dialog boxes as shown in this example. Double-click on the command and the dialog will appear. To add a parameter:\\ \\ - Click on the **Add New Parameter** button.\\ - In the pop-up window (shown on far right), specify the parameter name **PARAM2**\\ - Specify the data type **int**\\ - Specify the default data value **2**  |  [[Image:EditPromptForMultiplePipelineParameter.gif]|

The completed command should look like the following:

<code>
Prompt_For_Multiple_Pipeline_Parameter_Values
/PIPELINE_PARAMETER_NAME=PARAM1+PARAM2
/DATATYPE=int+int
/DEFAULT_VALUE=1+2
;
</code>

|When the command is executed the following dialog appears. The user can modify the Default Values by selecting each item.  |  {{:PromptForMultipleParameterValuesDlg.png}}|

=== Example2 ===

\\
**Using the DEFAULT_VALUE_COUNT parameter:**\\


|\\ If the DEFAULT_VALUE_COUNT parameter is set to 1 (this is the default value), each pipeline parameter can only be set to one value. Using the DEFAULT_VALUE_COUNT parameter command (shown on the right) allows the user to set a pipeline parameter to a list of values. An example of the prompt using this parameter is shown below.  |<code>\\ Prompt_For_Multiple_Pipeline_Parameter_Values\\ /PIPELINE_PARAMETER_NAME=SCOTT+SCOTT2\\ /DATATYPE=string+int\\ /DEFAULT_VALUE=one+two+3+4+5+6\\ /DEFAULT_VALUE_COUNT=2+4\\ ;\\ </code>  |

{{:Prompt_Multiple_Default_Value_Count.png}}

\\