Differences

This shows you the differences between two versions of the page.

--- visual3d:getting_started:visual3d_release_notes [2025/03/11 20:31] – Added v2025.03.1 wikisysop
+++ visual3d:getting_started:visual3d_release_notes [2025/04/25 18:51] (current) – Added release notes for v2025.04.1 and v2025.04.2 and cleaned up 2021 release notes. wikisysop
@@ Line 8: / Line 8: @@
 ==== Updates in 2025 ====
+  - Updates for 2025.04.2
+    - [Bug Fix] Mouse-over of a report graph previously limited the text display to 80 characters. This is now extended to an unlimited number of characters.
+    - [Bug Fix] Minor bug fixes.
+  - Updates for 2025.04.1
+    - [Enhancement] Mouse-over of a report graph previously limited the text display to 80 characters. This is now extended to an unlimited number of characters
+    - [Enhancement] Added the Modify_Signal_Rate command to modify the point, analog, and rotation rate without resampling the data. This was intended to correct errors in the sampling rate stored in the parameters.
+    - [Bug Fix] The Set_View_Options command did not save to the registry properly.
+    - [Bug Fix] Minor bug fixes.
+  - Updates for 2025.03.2
+    - [Enhancement] Substantial changes to the Metric_Time_Of_Global_Maximum_From_Event command relating to which components can be exported and which components can be used for the event detection.
+    - [Enhancement] Added a model metric for Sex to the Manage_File_Merge command. This was made necessary by recent Theia3D releases which include inertial parameters separated by Male and Female.
+    - [Bug Fix] The Event_Maximum command failed to select the correct point frame based on the subframe found. This happened randomly when the subframe was in the middle of two frames.
+    - [Bug Fix] The Add_Landmark command crashed when a model expression for distance contained rotation signals.
+    - [Bug Fix] Several minor bug fixes.
   - Updates for 2025.03.1
     - [Enhancement] Allow a model of one subject to exist over multiple static files
@@ Line 13: / Line 27: @@
     - [Enhancement] Add new command Copy_Segment_Assignments_To_Force_And_COP allowing the GRF to be applied to more than one subject simultaneously
     - [Enhancement] Add a new C3D parameter for the sex of the subject.
-    - [Enhancement] Add an option to Manage_Theia3D_Merge to specify a virtual lab
+    - [Enhancement] Add an option to Manage_File_Merge to specify a virtual lab
     - [Bug Fix] Fixed a bug in Add_Landmark should a customer include the reserved string ORIGIN in the definition
     - [Bug Fix] Fixed a bug where the Coda pelvis wasn't being animated correctly when a CMZ file is opened
@@ Line 439: / Line 453: @@
 === Updates in 2021 ===
-|     2021 Releases                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |
+  - Updates in 2021.12.2
-|Updates in 2021.12.2\\ \\ * [Enhancement] More command support for subjects\\ * [Bug Fixes] Fixed bugs related to subjects from\\ \\ <code>\\  prior preview releases.\\ </code>\\ \\ * [Enhancement] All prior dialog updates for\\ \\ <code>\\  usability with multiple subjects\\ </code>\\ \\ * [Enhancement] All prior multisubject support\\ \\ <code>\\  using subject prefixes defined in C3D parameters.\\ </code>\\ \\ Updates in 2021.11.5\\ \\ * [Enhancement] Multisubject support using subject\\ \\ <code>\\  prefixes defined in C3D parameters.\\ </code>\\ \\ * [Enhancement] Mutiple separate static calibration\\ \\ <code>\\  files to be applied to C3D files.\\ </code>\\ \\ * [Enhancement] Numerous support for multiple\\ \\ <code>\\  subjects in order to support metric and other\\  command data calculations.\\ </code>\\ \\ Updates in 2021.09.1\\ \\ * [Bug Fix] Fix customer crash when using IK\\ * [Bug Fix] Fix Remove_Metric_By_Threshold command\\ * [Enhancement] More releases supported for\\ \\ <code>\\  interfacing with MATLABÂ®.\\ </code>\\ \\ Updates in 2021.06.2\\ \\ * [Regression fix] Fix filters when signal name\\ \\ <code>\\  is not specified\\ </code>\\ \\ * [Enhancement] New command to swith to workspace\\ \\ <code>\\  tab\\ </code>\\ \\ * [Bug Fix] Fix export row format\\ * Enhancement] Add command for importing data\\ \\ <code>\\  from Delsys Avanti csv files\\ </code>\\ \\ * [Bug Fix] Allow files in hidden folders to be\\ \\ <code>\\  opened in the pipeline\\ </code>\\ \\ * [Bug Fix] Compute_Distance_Map fix for segment\\ \\ <code>\\  colorization\\ </code>\\ \\ * [Enhancement] Some Theia file processing\\ \\ <code>\\  changes\\ </code>\\ \\ Updates in 2021.06.1\\ \\ * [Enhancement] Add additional default folders\\ \\ <code>\\  for user to set in the pipeline for added \\  flexibility.\\ </code>\\ \\ * [Enhancement] Add start and end frame for\\ \\ <code>\\  export to ascii when outputing to XML.\\ </code>\\ \\ * [Enhancement] Additional Theia3D support\\ \\ <code>\\  changes\\ </code>\\ \\ * [Bug Fix] Fix crash on a bad IK chain.\\ * [Enhancement] Pipeline command to create\\ \\ <code>\\  a graph should create the graph anyways even\\  when signal does not exist.\\ </code>\\ \\ * [Bug Fix/Enhancements] CalTester jig bug,\\ \\ <code>\\  and implement new features\\ </code>\\ \\ * [Feature] Compute_Distance_Map updates.\\ * [Enhancement] Fix bad parameter block with\\ \\ <code>\\  incorrect size given in C3D file.\\ </code>\\ \\ Updates in 2021.04.1\\ \\ * [Bug Fix] Compute Distance Map changes\\ * [Bug Fix] OpenSim export bug fix\\ * [Enhancement] Resample Data command features\\ * [Enhancement] Changes for Theia files support\\ \\ Updates in 2021.03.2\\ \\ * [Bug Fix] Fix Real Time calculation of\\ \\ <code>\\  Joing Angular Velocity which was off by\\  a factor of 4 due to incorrect data rate\\  calculation.\\ </code>\\ \\ * [Bug Fix] Fix Theia3D manufacturer\\ \\ <code>\\  parameters to recognize Theia as the \\  manufacturer.\\ </code>\\ \\ * [Bug Fix] Kinatrax File Open empty C3D\\ * [Bug Fix] Command Modify Analog\\ \\ <code>\\  Parameters needed to have data structure\\  initialized.\\ </code>\\ \\ * [Feature] Add resampling functionality\\ \\ <code>\\  when Analog signals are imported as DERIVED.\\ </code>\\ \\ Updates in 2021.03.1\\ \\ * [Bug Fix] Initialize KinaTrax variables\\ \\ <code>\\  and move command to set the CS \\  alignment.\\ </code>\\ \\ * [Bug Fix] Fix Metric Maximum and\\ \\ <code>\\  Minimum when using the Library.\\ </code>\\ \\ * [Bug Fix] Fix model angular momentum\\ \\ <code>\\  regression.\\ </code>\\ \\ * [Performance] Speed up creating new graph\\ \\ <code>\\  when browsing the library, after closing\\  the edit graph dialog.\\ </code>\\ \\ Updates in 2021.02.1\\ \\ * [Bug Fix] Fixed representative signal\\ \\ <code>\\  processing.\\ </code>\\ \\ * [Bug Fix] Fixed display of\\ \\ <code>\\  event_sequences in quick view display\\ </code>\\ \\ * [Bug Fix] Fixed expression bug in new\\ \\ <code>\\  leg of expression parsing intended to\\  process strings which indexed \\  improperly into empty double array.\\ </code>\\ \\ Updates in 2021.01.1\\ \\ * [New Feature] Addition of event range\\ \\ <code>\\  for FP Auto Baseline for files with bad\\  force data at the start or end of trial.\\ </code>\\ \\ * [Bug Fix] Fix fo rmodifying the max/min\\ \\ <code>\\  range of multiple graphs.\\ </code>\\ \\ * [Bug Fix] Minor correction for combining\\ \\ <code>\\  forces when a segment hits multiple \\  plates.\\ </code>\\ \\ * [New Feature] Allow JOINT_VELOCITY and\\ \\ <code>\\  JOINT_ACCELERATION for \\  Compute_Model_Based pipeline command\\  to resolve resultant vector in a\\  Cardan sequence.\\ </code>\\ \\ * [New Feature] Allow strings to be used\\ \\ <code>\\  in string expressions mixed with values\\  in order to use * operator and + \\  operator to select string values based\\  on conditionals.\\ </code>\\ \\ Updates in 2020.11.2\\ \\ * [Bug Fix] Fix list boxes with checks\\ \\ <code>\\  so they don't overlap when checking \\  the box.\\ </code>\\ \\ * [Compatibility] Updates for Theia\\ \\ <code>\\  compatibility\\ </code>\\ \\ * [Bug Fix] Fix for Joint Radius ratio\\ \\ <code>\\  (reduced)\\ </code>\\ \\ Updates in 2020.11.1\\ \\ * [Bug Fix] Metric Mean fix for "No Data"\\ * [Usability] Remove Apply Model Template\\ \\ <code>\\  "pop up" when not wanted\\ </code>\\ \\ * [Enhancement] Enhancement for\\ \\ <code>\\  combining 2 force platforms when not\\  in the same plane\\ </code>\\ \\ Updates in 2020.10.3\\ \\ * [Bug Fix] Fix graph selection in the\\ \\ <code>\\  Signal and Events Tab\\ </code>\\ \\ Updates in 2020.10.2\\ \\ * [Bug Fix] Fix crash when you add a\\ \\ <code>\\  Signal and Events tab graph, then \\  perform certain actions afterwards.\\ </code>\\ \\ * [Usability] Fix highlighting items,\\ \\ <code>\\  selecting an  item on the Report tab.\\ </code>\\ \\ Updates in 2020.10.1\\ \\ * [Bug Fix] Fix crash using characters\\ \\ <code>\\  in a character set not supported in\\  a Microsoft English (US) compile.\\  NOTE: While the crash is now handled\\  a message pop up tells the user that\\  the file name/path contains unsupported\\  characters.  The software may or may\\  not handle everything properly, such\\  as adding the file name to the recent\\  files list.  This is dependent on\\  underlying support of the microsoft\\  routines on the computer.\\ </code>\\ \\ Updates in 2020.09.1\\ \\ * [Bug Fix] Fix metric table items that\\ \\ <code>\\  were showing up blank\\ </code>\\ \\ * [Bug Fix] Realign graph titles for\\ \\ <code>\\  backward report template compatibility\\ </code>\\ \\ * [Bug Fix] Fix the drawing and use of\\ \\ <code>\\  graph tics\\ </code>\\ \\ * [Feature] New command to assist with\\ \\ <code>\\  reorganizing balloon text locations\\ </code>\\ \\ Updates in 2020.08.3\\ \\ * [Feature] Further support for Kinatrax\\ \\ <code>\\  .c3d file\\ </code>\\ \\ Updates in 2020.08.2\\ \\ * [Feature] Support for Kinatrax .c3d\\ \\ <code>\\  file containing has ROTATION data.\\ </code>\\ \\ * [Bug Fix] Set Pipeline Parameter To\\ \\ <code>\\  List Of Model Names did't work in\\  the Library.\\ </code>\\ \\ * [Bug Fix] Report dialog changes for\\ \\ <code>\\  black graph window.\\ </code>\\ \\ * [Bug Fix] Fixes to be able to graph\\ \\ <code>\\  Kinetic_Kinematic folder data.\\ </code>\\ \\ Updates in 2020.08.1\\ \\ * [Bug Fix] Fix C3D file read for file\\ \\ <code>\\  with large parameter.\\ </code>\\ \\ * [Bug Fix] Fix Export command to C3D\\ \\ <code>\\  file check for the end event.\\ </code>\\ \\ Updates in 2020.07.4\\ \\ * [Feature] Add ability to capture .avi\\ \\ <code>\\  files of the animation without having to\\  click 'OK' button for each export.\\ </code>\\ \\ * [Feature] Normalize .avi output of\\ \\ <code>\\  synchronized motion files so animations\\  using start and end event both start,\\  and end at the events in both files.\\  End frame of 0 will not normalize.\\ </code>\\ \\ Updates in 2020.07.3\\ \\ * [Bug Fix] Real-Time Metric_Maximum became\\ \\ <code>\\  broken and had a pre-existing issue with\\  certain combinations of signal/events\\ </code>\\ \\ * [Bug Fix] Fix crash when modifying a\\ \\ <code>\\  parameter for a Kistler file that doesn't\\  contain baselines for analog signals.\\ </code>\\ \\ * [Feature] Add ability to set a pipeline\\ \\ <code>\\  parameter to list of tags only for tags\\  associated with the active files.\\ </code>\\ \\ Updates in 2020.07.2\\ \\ * [Bug Fix] Fix several sources of Visual3D\\ \\ <code>\\    crashes due to unexpected causes (guard\\    commands and handle).\\ </code>\\ \\ * [Bug Fix] Fix for filtering rotation\\ \\ <code>\\    matrices.\\ </code>\\ \\ * [Compatibility] Update Motion Shadow\\ \\ <code>\\    support\\ </code>\\ \\ * [User Interface] Fix pipeline folder prompt\\ \\ <code>\\    to be modal instead of modeless. This \\    also prevents some issues which can cause\\    crashes.\\ </code>\\ \\ * [Debug] Add multiple message boxes to aid\\ \\ <code>\\    in debugging program errors.\\ </code>\\ \\ * [Bug Fix] Better file handling when\\ \\ <code>\\    exporting data to a text file.\\ </code>\\ \\ Updates in 2020.07.1\\ \\ * [Bug Fix] Fix a crash when saving a file onto a\\ \\ <code>\\    remote drive using File_Save_As command and\\    prompting for the file name.\\ </code>\\ \\ * [User Interface] Overlay Report - fix warning\\ \\ <code>\\    message \\ </code>\\ \\ Updates in 2020.06.1\\ \\ * Improve C3D read of incorrectly written C3D file\\ * Fix naming of analog signals in C3D file without\\ \\ <code>\\  Analog Labels\\ </code>\\ \\ * Export C3D range expression support\\ * Use arrow keys to change pages in report\\ * JSON output fixes\\ * CODA/Composite pelvis fix creating joints\\ * Create Any_Of and All_Of expression functions to\\ \\ <code>\\  create an overall boolean return (0 or 1) for\\  whether all, or any of a data item matches the\\  expression inside the function.\\  ie; All_Of(METRIC::ORIGINAL::DISTANCE_ITEM > 0.7)\\      Any_Of(METRIC::ORIGINAL::DISTANCE_ITEM > 0.7)\\ </code>\\ \\ Updates in 2020.05.1\\ \\ * Fix bug saving to a remote drive from the\\ \\ <code>\\  command File Save As. File ends up remaining\\  in the user's appData/local/temp folder. File\\  being saved to ends up being empty. The copy\\  from the temp folder to the final folder was\\  not trapped correctly in the command.\\ </code>\\ \\ * Progress control when shown from pipeline\\ \\ <code>\\  favorites was not hidden after script completion\\ </code>\\ \\ * Fix editing scripts using notepad button when\\ \\ <code>\\  the script has whitespace in the file name.\\ </code>\\ \\ * Fix arrow controls in report editing dialog.\\ * Delete IK Properties when loading a .vlk file.\\ * Account for c3d file units when using the create\\ \\ <code>\\  force platform corners based on the extent of the \\  force platforms in the Force Structures dialog.\\ </code>\\ \\ Updates in 2020.04.1\\ \\ * Recent improvements are now out of beta\\ \\ <code>\\  and are now released to production.\\ </code>\\ \\ * Tab to export CalTester file data\\ * Fix remote drive issue with performance\\ \\ <code>\\  and corruption due to the increased risk of\\  an undetected network blip while writing.\\  (Note: this uses local C: drive as temporary\\  staging point when using a network drive. If\\  you are using a network drive, ensure you have\\  enough space available for temporary .cmz files).\\ </code>\\ \\ * Make_Image_Item command synched with the edit\\ \\ <code>\\  dialog parameters.\\ </code>\\ \\ * Fix legend printing when using dashed lines.\\ * Allow gap filling for GCVSPL filter.\\ \\ \\ Updates in 2020.03.26\\ \\ * Allow export of CalTester data from\\ \\ <code>\\  CalTester tabbed dialog\\ </code>\\ \\ * Report Graphs bug fix\\ * Metric_Signal_Values_In_Sequence\\ \\ <code>\\  interpretation of NAN values and parameter\\ </code>\\ \\ * Minor bug fix when analog rate not specified\\ * Fix Metric Table report item editing\\ \\ <code>\\  when you click the item to edit.\\ </code>\\ \\ Updates in 2020.03.16\\ \\ * Fix margin settings being reset when\\ \\ <code>\\  switching modes or saving a file.\\ </code>\\ \\ * Metric signal values in sequence dialog\\ \\ <code>\\  changes\\ </code>\\ \\ * Minor force plate changes\\ * Minor Theia support changes\\ \\ Updates in 2020.03.03\\ \\ * Fix GVCSPL filter bug getting frames\\ * Updates to command Modify C3D Parameters\\ \\ Updates in 2020.02.28\\ \\ * Fix several bugs and crashes editing a report\\ * Performance fixes for pipelines and library\\ * Fix for Xsense crash when lower extremity only\\ * Fix report graph bug which causes multiple graph\\ \\ <code>\\  entities to be created, and incorrect one drawn.\\ </code>\\ \\ * Fix data store quirkiness which could cause odd\\ \\ <code>\\  behavior throughout.\\ </code>\\ \\ Updates in 2020.02.04\\ \\ * Fix crash for joint missing both segments\\ * Fix several report editing crash instances\\ * Use full file path for auto built models from movement\\ * Fix tracking target list selection for rare circumstance\\ * Fix GLOBAL item used in Subtract_Signals\\ * Clean up joints created when segments no longer exist\\ * Continue visual changes for 2020 release\\ \\ Updates in 2020.01.20\\ \\ * Change to meaningful date based releases so users\\ \\ <code>\\  are aware of how long it has been since their last\\  update.\\ </code>\\ \\ * Fixed graph draw order in report templates which\\ \\ <code>\\  became reversed.\\ </code>\\ \\ * Add GET_NUMBER_OF_REPORT_PAGES function for expressions\\ \\ <code>\\  and allow use on report pipeline commands.\\ </code>\\ \\ * Fix quirky behavior in FPLoc dialogs and jig property\\ \\ <code>\\  pages related to drawing targets in color.\\ </code>\\ \\ * Modifications of data written to mvnx file\\ * Fix 2 dimensional float data dimensions.\\ \\ Updates in 6.05.07\\ \\ * More data file support changes\\ * CalTester fix\\ * STRING_REVERSE_FIND function added to expressions\\ \\ Updates in 6.05.06\\ \\ * Remove inadvertent debug code left in\\ * Allow passing in default folder when launched from\\ \\ <code>\\  the command line\\ </code>\\ \\ * Allow multiple pipelines to be passed in when launched\\ \\ <code>\\  from the command line\\ </code>\\ \\ Updates in 6.05.05\\ \\ * Fix CalTester selection of a range so it will persist.\\ * Make Right_Toes and Left_Toes default segments\\ * Modify Delsys ascii import to read AVANTI data\\ * Computer Power from DFT coefficients was only computing\\ \\ <code>\\  the first instance (fixed).\\ </code>\\ \\ Updates in 6.05.04\\ \\ * Fix synchronized video issues\\ * Add expression functions for converting between\\ \\ <code>\\  rotations and quaternions\\ </code>\\ \\ * X-Factor projection feature\\ * Fix Make_Image_Item command to update report list\\ \\ <code>\\  when it is the only item on the page.\\ </code>\\ \\ Updates in 6.05.03\\ \\ * More enhancements and updates to report editing\\ * Allow wildcards to be used for Signal_Names in\\ \\ <code>\\  pipeline commands\\ </code>\\ \\ * Updates to support changes made to the C3D Format\\ * Point_Distance_To_Line function added as an expression\\ \\ Updates in 6.05.02\\ \\ * Updates for systems using C3D rotations.\\ \\ Updates in 6.05.01\\ \\ * Under the covers major change in compiler\\ * Report editing improvements for the report tab\\ * Fix print to PDF error for staggered graphs\\ * Some changes in infrastructure for future Visual3D\\ \\ <code>\\  features.\\ </code>\\ \\ * Add Set_Pipeline_Parameter_To_List_Of_Model_Names\\ \\ <code>\\  command to assist with running model building\\  commands.\\ </code>\\ \\ * Fix Command_Signal_Cluster_Interpolate command crash\\ * Clean up model building dialogs to prepare for future\\ \\ <code>\\  features being developed\\ </code>\\ \\ * Add ThoracicCervicleAcromiumToT12 graphic object\\ * Fix Transform_Data_Coordinate_System to work with\\ \\ <code>\\  Force Plate data when using IK\\ </code>\\ \\ Updates in 6.03.07\\ \\ * Add capability to remove segments from consideration\\ \\ <code>\\  from assigning a force to it.\\ </code>\\ \\ * Some commands using a model metric sometimes do not\\ \\ <code>\\  access the model properly, fixed to be consistent\\  when multiple models are present.\\ </code>\\ \\ * Gap fill clusters using locations of the tracking\\ \\ <code>\\  markers (prototype hidden).\\ </code>\\ \\ * Fix page title when no report items exist on the page\\ * Fix CalTester to allow manual selection of the FP\\ \\ <code>\\  being tested.\\ </code>\\ \\ Updates in 6.03.06\\ \\ * Fix Metric_Event_Count when counting the last\\ \\ <code>\\  frame of a file to account for precision\\  variances.\\ </code>\\ \\ Updates in 6.03.05\\ \\ * Report item editing now returns list to same\\ \\ <code>\\  position when you selected item to edit.\\ </code>\\ \\ * Set_View_Options did not default to work the\\ \\ <code>\\  same as previous versions, corrected to allow\\  setting the background to white.\\ </code>\\ \\ * Metric folder viewing sometimes did not show\\ \\ <code>\\  all items in the folder.\\ </code>\\ \\ * Changes to Copy and Reflect Landmark to work\\ \\ <code>\\  better.\\ </code>\\ \\ * Allow model template to be applied to multiple\\ \\ <code>\\  static calibration file in Open and Append\\  commands.\\ </code>\\ \\ Updates in 6.03.04\\ \\ * Fix regression in FP Auto Baseline\\ * Fix bug to make analog synch signal visible\\ * Add edit dialog to Set_Frorce_Platform_Threshold\\ * Fix hybrid segment CG on serializing .cmz files\\ \\ <code>\\  - affects drawing of axes at CG\\ </code>\\ \\ Updates in 6.03.03\\ \\ * Fix when using rotations to determine pose.\\ * Scaling for P2D signals when using manual range.\\ * Create edit dialog for Set_Force_Platform_Threashold\\ \\ Updates in 6.03.02\\ \\ * Fix error in Metric_Signal_Value_At_Event\\ \\ Updates in 6.03.01\\ \\ * Delay load of dlls not called in Windows 7\\ \\ <code>\\  to prevent a Visual3D load error.\\ </code>\\ \\ Updates in 6.03\\ \\ * Roll up of all bug fixes and development changes\\ \\ <code>\\  in release candidates.\\ </code>\\ \\ * Set_Model_Metric command name compatibility\\ \\ <code>\\  with previous releases.\\ </code>\\ \\ Updates in 6.01.52 (release candidate)\\ \\ * Additional modifications for read only models\\ \\ <code>\\  when viewing the CMZ/CMO library of files.\\ </code>\\ \\ Updates in 6.01.51 (release candidate)\\ \\ * Fix read only library dialogs to disallow\\ \\ <code>\\  applying changes to a library model.\\ </code>\\ \\ * Fix libary display of targets in a model.\\ * Continue bug fixes for Average Filter and\\ \\ <code>\\  Set_View_Options command.\\ </code>\\ \\ Updates in 6.01.50 (release candidate)\\ \\ * New report editing interfaces to integrate\\ \\ <code>\\  various dialogs into cleaner tabbed\\  design.\\ </code>\\ \\ * COP_PATH normalization bug fix. This used\\ \\ <code>\\  to normalize ML and AP to the conical foot \\  circumference and was changed to normalize \\  only to the foot radius.\\ </code>\\ \\ * Real Time Plugin cleanup\\ * Fix crash in set data to new values.\\ * Add ALL_MODELS and ACTIVE_MODELS to\\ \\ <code>\\  Set_Model_Metric command to specify model.\\ </code>\\ \\ * Update processing results if pipeline run\\ \\ <code>\\  multiple times.\\ </code>\\ \\ * Text Data dialog bugs when resizing fix.\\ * Fix activiation bug on Windows 7\\ * Option added to force odd frames on filter\\ \\ <code>\\  commands.\\ </code>\\ \\ * Export FP and assignments from View/Modify\\ \\ <code>\\  Force Platform Assignments tab.\\ </code>\\ \\ * Modify Force Structure Parameters Speed Values\\ \\ <code>\\  were set to NAN\\ </code>\\ \\ * Fix transform data coordinate system upsample\\ \\ <code>\\  rate with IK signals.\\ </code>\\ \\ * Set view options command fixes for options which\\ \\ <code>\\  weren't working.\\ </code>\\ \\ * Fix bug moving event frames in dialog.\\ * Fixes for synchronized motion file dialog so\\ \\ <code>\\  it works better with the command.\\ </code>\\ \\ Updates in 6.01.49 (release candidate)\\ \\ * Fix control buttons on the real-time\\ \\ <code>\\  biofeedback tab.\\ </code>\\ \\ * Fix activation use of computer name\\ \\ <code>\\  to prevent duplication of mixed and\\  all upper case names.\\ </code>\\ \\ Updates in 6.01.47 (release candidate)\\ \\ * Fix rare bug causing a crash for setting\\ \\ <code>\\  analog baselines after loading a .cmz file\\  when fp_zeros are -1 on file load.\\ </code>\\ \\ * More changes in prompt for pipeline parameter\\ \\ <code>\\  value\\ </code>\\ \\ * RT fix for disconnect/reconnect\\ * Menu option to view ReadMe file.\\ \\ Updates in 6.01.45 (release candidate)\\ \\ * Allow segment colorization in synchronized\\ \\ <code>\\  motion file animation\\ </code>\\ \\ * Fix in prompt for pipeline parameter value\\ * Minor error corrected in real-time graphs\\ * Add option for Rename_Signals in cal file\\ \\ Updates in 6.01.43 (release candidate)\\ \\ * Updated video rendering for greater\\ \\ <code>\\  compatibility with video codecs.\\ </code>\\ \\ * Fix Make Line Graph command for\\ \\ <code>\\  intermediate events and exclude events\\  used with Event_Sequences\\ </code>\\ \\ * Indefinite Integral initial value fixes\\ * Event range issue when 2 events exist\\ \\ <code>\\  at the same time (rare instance).\\ </code>\\ \\ * Continued modifications in preparation of\\ \\ <code>\\  new report graph editing features.\\ </code>\\ \\ * Fix Evaluate_Expression crash for spline\\ * Software activation fix for Unicode Asian\\ \\ <code>\\  characters.\\ </code>\\ \\ * Fix missing Compute_Distance_Map command\\ \\ <code>\\  history.\\ </code>\\ \\ Updates in 6.01.41 (release candidate)\\ \\ * Fix discontinuity of joint angle X around\\ \\ <code>\\  90 degrees.\\ </code>\\ \\ Updates in 6.01.39 (release candidate)\\ \\ * Fix File Open regression in 6.01.37 for\\ \\ <code>\\  .cmo files saved between 2009-01 and \\  2010-11 versions of Visual3D.\\ </code>\\ \\ Updates in 6.01.37 (release candidate)\\ \\ * Fix digitizing pointer crash regression\\ * GCVSPL spline now handles rotations\\ * 64 bit IK precision tweak\\ * Add string_to_upper and string_to_lower\\ \\ <code>\\  expression functions\\ </code>\\ \\ * Fix consistency for IK target color animation\\ * Fix filtering crash, deny filtering for\\ \\ <code>\\  folders that shouldn't be filtered, fix\\  filter minor bug.\\ </code>\\ \\ * Tweak to handling of graph tick marks.\\ * New real time Metric_Maximum command\\ * LINK_MODEL_BASED GRF_DATA now set to zero,\\ \\ <code>\\  instead of NAN when no force present.\\ </code>\\ \\ Updates in 6.01.36\\ \\ * Fix crash when event referenced in an\\ \\ <code>\\  event sequence is empty (Performance fix\\  regression).\\ </code>\\ \\ Updates in 6.01.35\\ \\ * Fix crash obtaining event ranges when\\ \\ <code>\\  one of the events exists, but is empty.\\ </code>\\ \\ * Code infrastructure changes for\\ \\ <code>\\  standardization\\ </code>\\ \\ * Lowpass Filter error reporting update\\ \\ <code>\\  for maximum cutoff frequency\\ </code>\\ \\ * Modifications for synchronized motion\\ \\ <code>\\  files (and library capability).\\ </code>\\ \\ * Popup command wizard fix for recognizing\\ \\ <code>\\  the correct pipeline.\\ </code>\\ \\ * Fix for CalTester target residuals being\\ \\ <code>\\  graphed.\\ </code>\\ \\ Updates in 6.01.34\\ \\ * Fix marker highlight in Model Building\\ \\ <code>\\  regression for segment calibration\\  markers.\\ </code>\\ \\ * Fix segment dialog for rotations.\\ * Remove warning for Make_Line_Graph\\ \\ <code>\\  when event sequence not used.\\ </code>\\ \\ * Map segment & muscle color modified to\\ \\ <code>\\  use default active model.\\ </code>\\ \\ * Set_Scale_Of_Objects command added.\\ \\ Updates in 6.01.33\\ \\ * Helical Angle fix for when resolution\\ \\ <code>\\  coordinate system is set.\\ </code>\\ \\ * Set Animate Multiple File changes\\ * Allow export of Force assignments\\ * Allow import of TEXT_DATA from\\ \\ <code>\\  ASCII file.\\ </code>\\ \\ Updates in 6.01.32\\ \\ * Fix regression for edit graph for\\ \\ <code>\\  start and stop event.\\ </code>\\ \\ Updates in 6.01.31\\ \\ * Fix precision issue exporting to ASCII\\ \\ <code>\\  files\\ </code>\\ \\ * Add Event_Sequences support for all\\ \\ <code>\\  commands and graphs.\\ </code>\\ \\ * Add a bat object\\ * Fixed synchronized scene for multiple\\ \\ <code>\\  models\\ </code>\\ \\ * Misc Kinatrax changes\\ * Filter cutoff for 6DOF segments\\ * Fix crash in saving model template\\ * Allow breakpoint text to be TEXT_DATA\\ \\ <code>\\  signal\\ </code>\\ \\ * Fix default folder on Import ASCII to\\ \\ <code>\\  be null string, not .txt\\ </code>\\ \\ Updates in 6.01.30\\ \\ * Fix position of report page title to\\ \\ <code>\\  account for margin changes\\ </code>\\ \\ * Fix pipeline breakpoint dialog to\\ \\ <code>\\  allow for more text to be displayed\\ </code>\\ \\ * Fix command to load RT pipeline to\\ \\ <code>\\  lock shared resources to prevent\\  crash\\ </code>\\ \\ * Camera tracking tweaks\\ * Modify label scaling in reports\\ * Allow selecting a line on a graph in the\\ \\ <code>\\  report tab when animating\\ </code>\\ \\ * Allow event_sequence when exporting dat\\ \\ <code>\\  to an ASCII file\\ </code>\\ \\ Updates in 6.01.29\\ \\ * Fix performance issue with event sequences\\ * Add animation frame line to report graphs\\ * Add legend option to view graph line value\\ \\ <code>\\  when viewing animation in report mode\\ </code>\\ \\ * Fix bug which can create duplicate event\\ \\ <code>\\  timestamps at the same frame\\ </code>\\ \\ * Fix animation banner visibility\\ * Fix event sequence export to ASCII bug\\ * Fix command to attach camera to segment\\ \\ \\ Updates in 6.01.28\\ \\ * Real Time resource leak causing freezes and\\ \\ <code>\\  crashes\\ </code>\\ \\ Updates in 6.01.27\\ \\ * Handle missing data when exporting report\\ \\ <code>\\  item to text file\\ </code>\\ \\ * Formatting of report text size tweaks\\ * Add Frame_Count function to Evaluate_Expression\\ \\ <code>\\  to return the number of frames in a signal\\ </code>\\ \\ * Fix explicit frame numbers when specifying a\\ \\ <code>\\  frame in an expression to handle it being\\  1 based\\ </code>\\ \\ Updates in 6.01.26\\ \\ * Allow setting pipeline parameter to a\\ \\ <code>\\  file's folder path.\\ </code>\\ \\ * Colormap updates, including the ability\\ \\ <code>\\  to set fixed range colormaps to standardize\\  the colormap used to color animation objects.\\ </code>\\ \\ * Fix obscure bug displaying the Center of\\ \\ <code>\\  Gravity of segments when opening saved\\  .cmz files and the coordinate system is\\  not Z up, and when the option is selected\\  to draw the axis at the center of the segment.\\ </code>\\ \\ * Allow explicit frame range for the SNIP\\ \\ <code>\\  expression.\\ </code>\\ \\ * FILE_OPEN fix for .vnd files.\\ * Dialog item user interface tweaks for\\ \\ <code>\\  several commands.\\ </code>\\ \\ * Fix crash for certain sequences of navigation\\ \\ <code>\\  through model muscle dialogs.\\ </code>\\ \\ * Change behavior of expression or operator |\\ \\ <code>\\  to better handle NAN.\\ </code>\\ \\ Updates in 6.01.25\\ \\ * Fixed regression in opening VND files\\ \\ <code>\\  caused an invalid error message to appear \\  and the file not opened.  \\ </code>\\ \\ Updates in 6.01.24\\ \\ * 64 bit Matlab version support\\ \\ Updates in 6.01.23\\ \\ * Fix missing View Kinematic Only Segments\\ \\ <code>\\  property read from registry.\\ </code>\\ \\ * Update viewer when selecting tracking\\ \\ <code>\\  markers in Model Builder\\ </code>\\ \\ * Fis background color of RT graphs for\\ \\ <code>\\  threshold when selecting default\\ </code>\\ \\ * Changed interpretation of legacy treadmill\\ \\ <code>\\  direction\\ </code>\\ \\ * Fix digitizing post processing crash\\ * Display Signal Stats data header fix for\\ \\ <code>\\  quick view\\ </code>\\ \\ * Fix getting filenames from disk for extra\\ \\ <code>\\  items returned in rare scenarios.\\ </code>\\ \\ * Fix Evaluate_Expression crash\\ * Force a recalc when saving and motion\\ \\ <code>\\  file segments are out of synch with model\\ </code>\\ \\ * Avoid pelvis gimbal lock during follow\\ \\ <code>\\  through using Z-X-Y\\ </code>\\ \\ Updates in 6.01.22\\ \\ * Fix timestamps when only analog channels\\ \\ <code>\\  streamed.\\ </code>\\ \\ Updates in 6.01.21\\ \\ * Fix real time crash editing real time\\ \\ <code>\\  pipeline while streaming\\ </code>\\ \\ * Fix baseline changes in\\ \\ <code>\\  Modify_Analog_Parameters command.\\ </code>\\ \\ * Fix using reduced FP min in\\ \\ <code>\\  Auto_FP_Baseline command\\ </code>\\ \\ * Fix time offset in Event_Copy command\\ * Fix crash when .cmz file is saved\\ \\ <code>\\  after modifying the number of segments\\  in the model, but without applying the\\  model to the motion files.\\ </code>\\ \\ * Backward compatibility fix for .cmz\\ \\ <code>\\  segment residual to prevent crash when\\  reading new .cmz files in older Visual3D.\\ </code>\\ \\ Updates in 6.01.20\\ \\ * Basic filtering BETA added to realtime\\ * Several minor bugs fixed in the RT\\ \\ <code>\\   Biofeedback processing\\ </code>\\ \\ Updates in 6.01.19\\ \\ * Fix segment residual for last frame of data\\ \\ <code>\\  read by .cmz files.\\ </code>\\ \\ * Fix minor recent file list issue.\\ * Create Analog Rate parameter if missing\\ \\ Updates in 6.01.18\\ \\ * Fix Spline/Snip commands for P2D data.\\ * Allow graphing of 1 component P2D data.\\ \\ Updates in 6.01.17\\ \\ * Fix .cmz file open regression of files\\ \\ <code>\\  with a lot of events.\\ </code>\\ \\ * Fix Set_Data_To_New_Values to work with P2D\\ \\ <code>\\  data\\ </code>\\ \\ * Fix RT bar graph quirks\\ * Fix reading Matfiles with extra unexpected\\ \\ <code>\\  variables that are not cell arrays\\ </code>\\ \\ * Save model template fix for IK rotation axes\\ * Allow deleting data with blank signal name\\ * Fix quirks with drawing the floor\\ \\ Updates in 6.01.16\\ \\ * Processing results performance changes and\\ \\ <code>\\  fix display settings.\\ </code>\\ \\ * Allow the user to set default results settings\\ \\ <code>\\  and temporary ones for the current pipeline\\  by command.\\ </code>\\ \\ * Allow P2D data for Set_Data_To_New_Values\\ \\ <code>\\  command.\\ </code>\\ \\ * Add @Eval( ) for special cases for command\\ \\ <code>\\  parameters.\\ </code>\\ \\ * Fix exporting more than 255 events.\\ * Fix analog scale when set to NaN.\\ * Save paper size to .cmo/z files.\\ * Fix IK for a 1 segment link.\\ * Fix Export_Line_Graph_Pipeline components.\\ \\ Updates in 6.01.15\\ \\ * Fix uninitialized variable and consolidate\\ \\ <code>\\  duplicated information internally.\\ </code>\\ \\ Updates in 6.01.14\\ \\ * Enhance internal pipeline command\\ \\ <code>\\  restrictions for Reckon3D\\  compatibility\\ </code>\\ \\ Updates in 6.01.13\\ \\ * Fix View_Processing_Results command\\ * Fix regression setting 'time' to 'frames'\\ \\ <code>\\  in report graphs\\ </code>\\ \\ * Fix Cross_Product obscure components bug.\\ \\ Updates in 6.01.12\\ \\ * Add RT graph options for custom title, center\\ \\ <code>\\  the title.\\ </code>\\ \\ * Add RT option to remove Y axis label from\\ \\ <code>\\  biofeedback graphs\\ </code>\\ \\ * Fix popups error unprotecting a folder\\ * Fix report legend on staggered graphs\\ * Fix error loading an interactive graph layout\\ \\ Updates in 6.01.11\\ \\ * Tweak real time bar graph spacing and size.\\ * CalTester bug with target data in meters.\\ * Fix export C3D file with landmarks bug.\\ * Fix export C3D file bug when first frame\\ \\ <code>\\  is > 1.\\ </code>\\ \\ * Fix kinematic only Helen Hayes pelvis.\\ * Fix real time color representation in\\ \\ <code>\\  graph dlg.\\ </code>\\ \\ Updates in 6.01.10\\ \\ * Fix report annotations error with average event\\ * Fix Copy Event dialog which changed new event\\ \\ <code>\\  to upper case.\\ </code>\\ \\ Updates in v6.01.09\\ \\ * Handle Frames/Time in Realtime\\ * Fix signal folder selection in report graph\\ \\ <code>\\  dialog\\ </code>\\ \\ * Add RT Scroll direction change option for RT graphs\\ * Allow RT Bar graph color change using line color\\ * Add option to view segment lines as cylinders\\ * Fix Resolve_Discontinuity issue with 1st frame\\ * Fix IK dependency order build issue\\ \\ Updates in v6.01.08\\ \\ * Fix report crash when annotations index into signal\\ \\ <code>\\  beyond the frames contained in the signal.\\ </code>\\ \\ * Fix bar graph flicker in realtime\\ * Fix realtime FPS processing of Evaluate_Expression.\\ * Tweaks to OpenGL animation\\ \\ Updates in v6.01.07\\ \\ * Fix landmark updates when segment location updates\\ \\ <code>\\  for IK in the static model.\\ </code>\\ \\ * Pause when printing from a script in order to\\ \\ <code>\\  prevent issues when printting page changes.\\ </code>\\ \\ * Fix asci file target scaling for some files.\\ * Fix Metric_Event_Sequence_Count\\ \\ Updates in v6.01.06\\ \\ * Fix custom segment mass expression from reverting\\ \\ <code>\\  to default expression when using a default \\  geometry after you modify subject mass.\\ </code>\\ \\ * Revert GCVSPL behavior back to 6.01.03 behavior.\\ * Tweaks to Matlab engine interface to see if it\\ \\ <code>\\  fixes some obscure message from popping up for\\  some users.\\ </code>\\ \\ * Fix Set Data To New Value for analog subframes\\ * Fix Remove_Prefix_From_Point_Labels when a bad\\ \\ <code>\\  prefix parameter is specified.  Fix modifying\\  the static trial when no motion file is assigned\\  to it.\\ </code>\\ \\ * Add a Create_Rotation command\\ * Add segment selection to Compute_Planar_Angle\\ \\ <code>\\  dialog.\\ </code>\\ \\ * Fix Append_Model_Template for IK Chains that\\ \\ <code>\\  have segments that already exist in the model.\\ </code>\\ \\ * Update recent path when there is an error with\\ \\ <code>\\  the file opened, you probably want to go to that\\  path again to select the correct file.\\ </code>\\ \\ Updates in v6.01.05\\ \\ * Fix obscure model building error introduced in\\ \\ <code>\\  6.01.04\\ </code>\\ \\ Updates in v6.01.04\\ \\ * Performance tweaks\\ * Fixes in the Mayo Functional Joints algorithm\\ * Fix multithreading crash\\ * Continued IOR_Quality_Assurance modifications\\ * Fix copy and reflect, or copy segment when\\ \\ <code>\\  segment is not using default SCS\\ </code>\\ \\ * Add Metric_Interquartile_Range command and\\ \\ <code>\\  expression\\ </code>\\ \\ * Change expression integration commands to\\ \\ <code>\\  Indefinite_Integral and Metric_Integrate. \\  Also changed metric expression commands to\\  use the prefix "Metric_" to clarify expressions.\\ </code>\\ \\ * Fix exit real time crash when streaming\\ * Fix SVG axis labels\\ * Export animation frame fixes\\ * New command to draw poly lines around a point in\\ \\ <code>\\  real time\\ </code>\\ \\ * Infrastructure changes for processing results\\ \\ Updates in v6.01.03\\ \\ * Performance tweaks\\ * Update Opensim default to 2.3\\ * Fix Modify_Force_Structures crash\\ * Fix Edit_Report_Text dialog bug\\ * IOR_Quality_Assurance command availability\\ * Functional Joints Definition dialog modifications\\ * C3D file fix for customer's erroneous C3D file so\\ \\ <code>\\  it can be read and fixed.\\ </code>\\ \\ * Menu Settings option to turn multi threading\\ \\ <code>\\  on or off for Visual3D.\\ </code>\\ \\ Updates in v6.01.02\\ \\ * Fix drawing floor when no model file is given\\ * Fix balloon text expression information in\\ \\ <code>\\  saved .cmz files\\ </code>\\ \\ * Real time color changes in graphs for target range\\ * Real time temporal and distance metric creation\\ \\ <code>\\  which prevented use in bar charts\\ </code>\\ \\ Updates in v6.01.01\\ \\ * Fix balloon text saved to a file which requires\\ \\ <code>\\  expression evaluation\\ </code>\\ \\ * Fix slow loading of Kinatrax files\\ * Fix Real Time graphs when transitioning to lower\\ \\ <code>\\  threshold colors of yellow and red lines\\ </code>\\ \\ * Add Real Time biofeedback command for\\ \\ <code>\\  Biofeedback_Show_Image_In_Range\\ </code>\\ \\ * Include missing .dll required for 64 bit Matlab\\ \\ Updates in v6.01.00\\ \\ * Real Time performance and functionality\\ \\ <code>\\  improvements\\ </code>\\ \\ * Matlab now available in 64 bit, with new and\\ \\ <code>\\  real time interfaces to put and eval directly\\  to the Matlab workspace\\ </code>\\ \\ * Numerous fixes and tweaks.\\ * Evaluate_Expression function additions for\\ \\ <code>\\  Metric_Integrate, Metric_Sum\\ </code>\\ \\ * Bring back old Functional Joints Post Processing\\ \\ <code>\\  abilities that went away in v6.\\ </code>\\ \\ * Visual3D Server interface issues dealing with\\ \\ <code>\\  force platforms and scaling\\ </code>\\ \\ * New IOR Quality Assurance command\\ \\ Updates in v6.00.34\\ \\ * Support for Kinatrax file format change.\\ * Add Next and Previous Warning buttons to\\ \\ <code>\\  processing results\\ </code>\\ \\ * Specify size (or null) for a landmark in the\\ \\ <code>\\  3D animation window.\\ </code>\\ \\ * Fix to export landmark when target of the same\\ \\ <code>\\  name contains no data.\\ </code>\\ \\ * Fix for automatic gait TPR to use first good\\ \\ <code>\\  ON and OFF events when first occurance is too\\  close to the start, or end of a file to perform\\  TPR.\\ </code>\\ \\ Updates in v6.00.33\\ \\ * Fix units conversion issue when interfacing\\ \\ <code>\\  with Visual3D RT Server.\\ </code>\\ \\ * Fix SVG export of report to include labels\\ * Fix NAN handling issue in certain expressions\\ \\ Updates in v6.00.32\\ \\ * Realtime fix for crash that occurs with\\ \\ <code>\\  specific licensing configurations\\ </code>\\ \\ * Report image resolution fix for high\\ \\ <code>\\  quality image display\\ </code>\\ \\ Updates in v6.00.31\\ \\ * Fix custom geometry CODA pelvis inertial\\ \\ <code>\\  properties when saving and loading a file.\\ </code>\\ \\ Updates in v6.00.30\\ \\ * Fixed graphics model object\\ * Fix landmark creation with deep dependencies\\ * Remove Signals for analog, update force platform\\ \\ Updates in v6.00.29\\ \\ * Assorted CalTester bugs fixed\\ * Force Structure update bug fixed\\ \\ Updates in v6.00.28\\ \\ * Fix user interface issues for encrypted data.\\ * CalTester, fix assorted bugs\\ * Force Structure processing in real-time..\\ \\ Updates in v6.00.27\\ \\ * Add Best_Fit_Sphere function to expressions.\\ * Fix Expression RAND function to be more random.\\ * Fix Remove_Signals command for no active files\\ \\ <code>\\  and for model files.\\ </code>\\ \\ Updates in v6.00.26\\ \\ * Performance fix for exporting high frame graph\\ * Improve defaults on File Save when closing files\\ * Make_Text_Annotations expressions\\ * Fix crash deleting a CODA pelvis\\ * Fix First_Frame when long integer used\\ \\ Updates in v6.00.25\\ \\ * Fix legends being drawn underneath graph lines\\ \\ <code>\\  (make work like they were drawn in v5)\\ </code>\\ \\ * Update pipeline processing window when open.\\ * Fix Auto FP Baseline when -Y is up.\\ * Prompt for file save when closing C3D files.\\ \\ Updates in v6.00.24\\ \\ * Fix CMO File open crash due to recalc pipeline\\ \\ <code>\\  stack overflow problem.\\ </code>\\ \\ * Fix getting the number of elements from a CMZ\\ \\ <code>\\  Library.\\ </code>\\ \\ Updates in v6.00.23\\ \\ * Fix crash in Set_Pipeline_Parameter_To_Data\\ \\ <code>\\  when using C3D Parameters.\\ </code>\\ \\ Updates in v6.00.22\\ \\ * Fix command to File_Open_CalTester_File\\ \\ <code>\\  when a file is named in the command.\\ </code>\\ \\ * Fix dialog to modify force structures.\\ \\ Updates in v6.00.21\\ \\ * Revert 'Condition_Statement' to act as\\ \\ <code>\\  'Expression_Loop' used to behave.\\ </code>\\ \\ * Fix activation for users who had a v6 evaluation\\ \\ <code>\\  installed before purchasing.\\ </code>\\ \\ * Allow Set_Pipeline_Parameter_To_Data_Value to use\\ \\ <code>\\  Text data.\\ </code>\\ \\ * Fix for Export_Line_Graph_Pipeline\\ * Fix Export_C3D_File when no files are active\\ \\ Update in v6.00.20\\ \\ * Fix CODA Pelvis dialog\\ * Fix bug in Add_Graph_Annotation from pipeline.\\ * Updated a few command dialogs\\ * Fix Conditional_Statement from appearing as though\\ \\ <code>\\  it executes twice in processing results.\\ </code>\\ \\ Update in v6.00.19\\ \\ * Fix for French language crash.\\ * Tweak printed bold lines to show up properly.\\ \\ Updates in v6.00.18\\ \\ * XSens mvnx compatibility fix\\ * Convert Pelvis segment type between types\\ \\ <code>\\  (CODA, V3D_Hybrid, etc).\\ </code>\\ \\ * Kinatrax model changes to match data in .csv file\\ * Feature to create FP surface corners from FP corners\\ * Expression compatibility fix for certain component\\ \\ <code>\\  access formats\\ </code>\\ \\ * Modify copy and reflect to work with more segment\\ \\ <code>\\  name formats (ie; L/R at end of name)\\ </code>\\ \\ Updates in v6.00.17\\ \\ * Fix crash reading .cmz/.cmo files with Helen Hayes\\ \\ <code>\\  pelvis\\ </code>\\ \\ * Fix Functional Joints/post processing crash\\ \\ Updates in v6.00.16\\ \\ * Fix Multiply_Signal_By_Constant to not crash when an\\ \\ <code>\\  element is specified that doesn't exist in the signal.\\ </code>\\ \\ * Fix Call_Script with a breakpoint so it can be resumed\\ \\ <code>\\  properly.\\ </code>\\ \\ Updates in v6.00.15\\ \\ * Conditional_Statement command made available\\ * Fix validation of Export_Graph command\\ * Fix file handling in Metric Compute Elipse command\\ * Fix bug exporting OpenSim using a front to back treadmill\\ * Fix calling a breakpoint from within a meta-command\\ \\ What's New in v6.00\\ \\ * 64 bit support\\ * Multithreaded processing to take full advantage of\\ \\ <code>\\  multicore processors.\\ </code>\\ \\ * CMZ file format to support fast file open times, and\\ \\ <code>\\  model access and processing from the CMZ library\\ </code>\\ \\ * Library segment animation, library model viewing and\\ \\ <code>\\  library Link_Model_Based calculation capability\\ </code>\\ \\ * Performance improvements throughout delivers very\\ \\ <code>\\  high performance model and data computations.\\ </code>\\ \\ * Incorporate CalTester+ force platform corner location\\ \\ <code>\\  functionality into Visual3D\\ </code>\\ \\ * IK Motion Constraints & Boundary Conditions\\ * Enhanced graphs with smoother lines (fix for print to\\ \\ <code>\\  PDF should work for dotted lines)\\ </code>\\ \\ * Syntax color coded text editor (pipeline)\\ * Modeless dialogs for Force Assignments & Force\\ \\ <code>\\  Platform Parameters\\ </code>\\ \\ * Query added to report items\\ \\ <code>\\  (examples using metrics and text data)\\ </code>\\ \\ * Copy Landmark Button\\ * New Commands:\\ \\ <code>\\  - Event threshold parameter added for all maximum and \\    minimum commands (Event & Metric)\\  - FP Auto Baseline for improved treadmill force results\\  - Locate Force Platform Corners\\  - Reset Segment Assignment to Force and COP\\  - Compute Confidence Ellipse (old name Compute \\    Trajectory Ellipse)\\  - Get Pipeline Parameter Index Value\\  - Expression Loop (now Conditional_Statement)\\  - New biofeedback animation commands\\  - Export Signals to XML Graph\\  - Set Text Item to store text information\\  - Commands to secure data by the use of \\    Folder Encryption\\ </code>  |
+    - [Enhancement] More command support for subjects
+    - [Bug Fixes] Fixed bugs related to subjects from prior preview releases.
+    - [Enhancement] All prior dialog updates for usability with multiple subjects.
+    - [Enhancement] All prior multisubject support using subject prefixes defined in C3D parameters.
+  - Updates in 2021.11.5
+    - [Enhancement] Multisubject support using subject prefixes defined in C3D parameters.
+    - [Enhancement] Multiple separate static calibration files to be applied to C3D files.
+    - [Enhancement] Numerous support for multiple subjects in order to support metric and other command data calculations.
+  - Updates in 2021.09.1
+    - [Bug Fix] Fix customer crash when using IK
+    - [Bug Fix] Fix Remove_Metric_By_Threshold command.
+    - [Enhancement] More releases supported for interfacing with MATLAB®.
+  - Updates in 2021.06.2
+    - [Regression fix] Fix filters when signal name is not specified.
+    - [Enhancement] New command to switch to workspace.
+    - [Bug Fix] Fix export row format
+    - [Enhancement] Add command for importing data from Delsys Avanti csv files.
+    - [Bug Fix] Allow files in hidden folders to be opened in the pipeline.
+    - [Bug Fix] Compute_Distance_Map fix for segment colorization.
+    - [Enhancement] Some Theia file processing changes.
+  - Updates in 2021.06.1
+    - [Enhancement] Add additional default folders for user to set in the pipeline for added flexibility.
+    - [Enhancement] Add start and end frame for export to ascii when outputing to XML.
+    - [Enhancement] Additional Theia3D support changes.
+    - [Bug Fix] Fix crash on a bad IK chain.
+    - [Enhancement] Pipeline command to create a graph should create the graph anyways even when signal does not exist.
+    - [Bug Fix/Enhancements] CalTester jig bug, and implement new features.
+    - [Feature] Compute_Distance_Map updates.
+    - [Enhancement] Fix bad parameter block with incorrect size given in C3D file.
+  - Updates in 2021.04.1
+    - [Bug Fix] Compute Distance Map changes.
+    - [Bug Fix] OpenSim export bug fix.
+    - [Enhancement] Resample Data command features.
+    - [Enhancement] Changes for Theia files support
+  - Updates in 2021.03.2
+    - [Bug Fix] Fix Real Time calculation of Joint Angular Velocity which was off by a factor of 4 due to incorrect data rate calculation.
+    - [Bug Fix] Fix Theia3D manufacturer parameters to recognize Theia as the manufacturer.
+    - [Bug Fix] Kinatrax File Open empty C3D.
+    - [Bug Fix] Command Modify Analog Parameters needed to have data structure initialized.
+    - [Feature] Add resampling functionality when Analog signals are imported as DERIVED.
+  - Updates in 2021.03.1
+    - [Bug Fix] Initialize KinaTrax variables and move command to set the CS alignment.
+    - [Bug Fix] Fix Metric Maximum and  Minimum when using the Library.
+    - [Bug Fix] Fix model angular momentum regression.
+    - [Performance] Speed up creating new graph when browsing the library, after closing the edit graph dialog.
+  - Updates in 2021.02.1
+    - [Bug Fix] Fixed representative signal processing.
+    - [Bug Fix] Fixed display of event_sequences in quick view display.
+    - [Bug Fix] Fixed expression bug in new leg of expression parsing intended to process strings which indexed improperly into empty double array.
+  - Updates in 2021.01.1
+    - [New Feature] Addition of event range for FP Auto Baseline for files with bad force data at the start or end of trial.
+    - [Bug Fix] Fix for modifying the max/min range of multiple graphs.
+    - [Bug Fix] Minor correction for combining forces when a segment hits multiple plates.
+    - [New Feature] Allow JOINT_VELOCITY and JOINT_ACCELERATION for Compute_Model_Based pipeline command to resolve resultant vector in a Cardan sequence.
+    - [New Feature] Allow strings to be used in string expressions mixed with values in order to use * operator and +  operator to select string values based on conditionals.
-===== Functional Changes =====
+=== Updates prior to 2021 ===
+Updates in 2020.11.2\\ \\ * [Bug Fix] Fix list boxes with checks\\ \\ <code>\\  so they don't overlap when checking \\  the box.\\ </code>\\ \\ * [Compatibility] Updates for Theia\\ \\ <code>\\  compatibility\\ </code>\\ \\ * [Bug Fix] Fix for Joint Radius ratio\\ \\ <code>\\  (reduced)\\ </code>\\ \\ Updates in 2020.11.1\\ \\ * [Bug Fix] Metric Mean fix for "No Data"\\ * [Usability] Remove Apply Model Template\\ \\ <code>\\  "pop up" when not wanted\\ </code>\\ \\ * [Enhancement] Enhancement for\\ \\ <code>\\  combining 2 force platforms when not\\  in the same plane\\ </code>\\ \\ Updates in 2020.10.3\\ \\ * [Bug Fix] Fix graph selection in the\\ \\ <code>\\  Signal and Events Tab\\ </code>\\ \\ Updates in 2020.10.2\\ \\ * [Bug Fix] Fix crash when you add a\\ \\ <code>\\  Signal and Events tab graph, then \\  perform certain actions afterwards.\\ </code>\\ \\ * [Usability] Fix highlighting items,\\ \\ <code>\\  selecting an  item on the Report tab.\\ </code>\\ \\ Updates in 2020.10.1\\ \\ * [Bug Fix] Fix crash using characters\\ \\ <code>\\  in a character set not supported in\\  a Microsoft English (US) compile.\\  NOTE: While the crash is now handled\\  a message pop up tells the user that\\  the file name/path contains unsupported\\  characters.  The software may or may\\  not handle everything properly, such\\  as adding the file name to the recent\\  files list.  This is dependent on\\  underlying support of the microsoft\\  routines on the computer.\\ </code>\\ \\ Updates in 2020.09.1\\ \\ * [Bug Fix] Fix metric table items that\\ \\ <code>\\  were showing up blank\\ </code>\\ \\ * [Bug Fix] Realign graph titles for\\ \\ <code>\\  backward report template compatibility\\ </code>\\ \\ * [Bug Fix] Fix the drawing and use of\\ \\ <code>\\  graph tics\\ </code>\\ \\ * [Feature] New command to assist with\\ \\ <code>\\  reorganizing balloon text locations\\ </code>\\ \\ Updates in 2020.08.3\\ \\ * [Feature] Further support for Kinatrax\\ \\ <code>\\  .c3d file\\ </code>\\ \\ Updates in 2020.08.2\\ \\ * [Feature] Support for Kinatrax .c3d\\ \\ <code>\\  file containing has ROTATION data.\\ </code>\\ \\ * [Bug Fix] Set Pipeline Parameter To\\ \\ <code>\\  List Of Model Names did't work in\\  the Library.\\ </code>\\ \\ * [Bug Fix] Report dialog changes for\\ \\ <code>\\  black graph window.\\ </code>\\ \\ * [Bug Fix] Fixes to be able to graph\\ \\ <code>\\  Kinetic_Kinematic folder data.\\ </code>\\ \\ Updates in 2020.08.1\\ \\ * [Bug Fix] Fix C3D file read for file\\ \\ <code>\\  with large parameter.\\ </code>\\ \\ * [Bug Fix] Fix Export command to C3D\\ \\ <code>\\  file check for the end event.\\ </code>\\ \\ Updates in 2020.07.4\\ \\ * [Feature] Add ability to capture .avi\\ \\ <code>\\  files of the animation without having to\\  click 'OK' button for each export.\\ </code>\\ \\ * [Feature] Normalize .avi output of\\ \\ <code>\\  synchronized motion files so animations\\  using start and end event both start,\\  and end at the events in both files.\\  End frame of 0 will not normalize.\\ </code>\\ \\ Updates in 2020.07.3\\ \\ * [Bug Fix] Real-Time Metric_Maximum became\\ \\ <code>\\  broken and had a pre-existing issue with\\  certain combinations of signal/events\\ </code>\\ \\ * [Bug Fix] Fix crash when modifying a\\ \\ <code>\\  parameter for a Kistler file that doesn't\\  contain baselines for analog signals.\\ </code>\\ \\ * [Feature] Add ability to set a pipeline\\ \\ <code>\\  parameter to list of tags only for tags\\  associated with the active files.\\ </code>\\ \\ Updates in 2020.07.2\\ \\ * [Bug Fix] Fix several sources of Visual3D\\ \\ <code>\\    crashes due to unexpected causes (guard\\    commands and handle).\\ </code>\\ \\ * [Bug Fix] Fix for filtering rotation\\ \\ <code>\\    matrices.\\ </code>\\ \\ * [Compatibility] Update Motion Shadow\\ \\ <code>\\    support\\ </code>\\ \\ * [User Interface] Fix pipeline folder prompt\\ \\ <code>\\    to be modal instead of modeless. This \\    also prevents some issues which can cause\\    crashes.\\ </code>\\ \\ * [Debug] Add multiple message boxes to aid\\ \\ <code>\\    in debugging program errors.\\ </code>\\ \\ * [Bug Fix] Better file handling when\\ \\ <code>\\    exporting data to a text file.\\ </code>\\ \\ Updates in 2020.07.1\\ \\ * [Bug Fix] Fix a crash when saving a file onto a\\ \\ <code>\\    remote drive using File_Save_As command and\\    prompting for the file name.\\ </code>\\ \\ * [User Interface] Overlay Report - fix warning\\ \\ <code>\\    message \\ </code>\\ \\ Updates in 2020.06.1\\ \\ * Improve C3D read of incorrectly written C3D file\\ * Fix naming of analog signals in C3D file without\\ \\ <code>\\  Analog Labels\\ </code>\\ \\ * Export C3D range expression support\\ * Use arrow keys to change pages in report\\ * JSON output fixes\\ * CODA/Composite pelvis fix creating joints\\ * Create Any_Of and All_Of expression functions to\\ \\ <code>\\  create an overall boolean return (0 or 1) for\\  whether all, or any of a data item matches the\\  expression inside the function.\\  ie; All_Of(METRIC::ORIGINAL::DISTANCE_ITEM > 0.7)\\      Any_Of(METRIC::ORIGINAL::DISTANCE_ITEM > 0.7)\\ </code>\\ \\ Updates in 2020.05.1\\ \\ * Fix bug saving to a remote drive from the\\ \\ <code>\\  command File Save As. File ends up remaining\\  in the user's appData/local/temp folder. File\\  being saved to ends up being empty. The copy\\  from the temp folder to the final folder was\\  not trapped correctly in the command.\\ </code>\\ \\ * Progress control when shown from pipeline\\ \\ <code>\\  favorites was not hidden after script completion\\ </code>\\ \\ * Fix editing scripts using notepad button when\\ \\ <code>\\  the script has whitespace in the file name.\\ </code>\\ \\ * Fix arrow controls in report editing dialog.\\ * Delete IK Properties when loading a .vlk file.\\ * Account for c3d file units when using the create\\ \\ <code>\\  force platform corners based on the extent of the \\  force platforms in the Force Structures dialog.\\ </code>\\ \\ Updates in 2020.04.1\\ \\ * Recent improvements are now out of beta\\ \\ <code>\\  and are now released to production.\\ </code>\\ \\ * Tab to export CalTester file data\\ * Fix remote drive issue with performance\\ \\ <code>\\  and corruption due to the increased risk of\\  an undetected network blip while writing.\\  (Note: this uses local C: drive as temporary\\  staging point when using a network drive. If\\  you are using a network drive, ensure you have\\  enough space available for temporary .cmz files).\\ </code>\\ \\ * Make_Image_Item command synched with the edit\\ \\ <code>\\  dialog parameters.\\ </code>\\ \\ * Fix legend printing when using dashed lines.\\ * Allow gap filling for GCVSPL filter.\\ \\ \\ Updates in 2020.03.26\\ \\ * Allow export of CalTester data from\\ \\ <code>\\  CalTester tabbed dialog\\ </code>\\ \\ * Report Graphs bug fix\\ * Metric_Signal_Values_In_Sequence\\ \\ <code>\\  interpretation of NAN values and parameter\\ </code>\\ \\ * Minor bug fix when analog rate not specified\\ * Fix Metric Table report item editing\\ \\ <code>\\  when you click the item to edit.\\ </code>\\ \\ Updates in 2020.03.16\\ \\ * Fix margin settings being reset when\\ \\ <code>\\  switching modes or saving a file.\\ </code>\\ \\ * Metric signal values in sequence dialog\\ \\ <code>\\  changes\\ </code>\\ \\ * Minor force plate changes\\ * Minor Theia support changes\\ \\ Updates in 2020.03.03\\ \\ * Fix GVCSPL filter bug getting frames\\ * Updates to command Modify C3D Parameters\\ \\ Updates in 2020.02.28\\ \\ * Fix several bugs and crashes editing a report\\ * Performance fixes for pipelines and library\\ * Fix for Xsense crash when lower extremity only\\ * Fix report graph bug which causes multiple graph\\ \\ <code>\\  entities to be created, and incorrect one drawn.\\ </code>\\ \\ * Fix data store quirkiness which could cause odd\\ \\ <code>\\  behavior throughout.\\ </code>\\ \\ Updates in 2020.02.04\\ \\ * Fix crash for joint missing both segments\\ * Fix several report editing crash instances\\ * Use full file path for auto built models from movement\\ * Fix tracking target list selection for rare circumstance\\ * Fix GLOBAL item used in Subtract_Signals\\ * Clean up joints created when segments no longer exist\\ * Continue visual changes for 2020 release\\ \\ Updates in 2020.01.20\\ \\ * Change to meaningful date based releases so users\\ \\ <code>\\  are aware of how long it has been since their last\\  update.\\ </code>\\ \\ * Fixed graph draw order in report templates which\\ \\ <code>\\  became reversed.\\ </code>\\ \\ * Add GET_NUMBER_OF_REPORT_PAGES function for expressions\\ \\ <code>\\  and allow use on report pipeline commands.\\ </code>\\ \\ * Fix quirky behavior in FPLoc dialogs and jig property\\ \\ <code>\\  pages related to drawing targets in color.\\ </code>\\ \\ * Modifications of data written to mvnx file\\ * Fix 2 dimensional float data dimensions.\\ \\ Updates in 6.05.07\\ \\ * More data file support changes\\ * CalTester fix\\ * STRING_REVERSE_FIND function added to expressions\\ \\ Updates in 6.05.06\\ \\ * Remove inadvertent debug code left in\\ * Allow passing in default folder when launched from\\ \\ <code>\\  the command line\\ </code>\\ \\ * Allow multiple pipelines to be passed in when launched\\ \\ <code>\\  from the command line\\ </code>\\ \\ Updates in 6.05.05\\ \\ * Fix CalTester selection of a range so it will persist.\\ * Make Right_Toes and Left_Toes default segments\\ * Modify Delsys ascii import to read AVANTI data\\ * Computer Power from DFT coefficients was only computing\\ \\ <code>\\  the first instance (fixed).\\ </code>\\ \\ Updates in 6.05.04\\ \\ * Fix synchronized video issues\\ * Add expression functions for converting between\\ \\ <code>\\  rotations and quaternions\\ </code>\\ \\ * X-Factor projection feature\\ * Fix Make_Image_Item command to update report list\\ \\ <code>\\  when it is the only item on the page.\\ </code>\\ \\ Updates in 6.05.03\\ \\ * More enhancements and updates to report editing\\ * Allow wildcards to be used for Signal_Names in\\ \\ <code>\\  pipeline commands\\ </code>\\ \\ * Updates to support changes made to the C3D Format\\ * Point_Distance_To_Line function added as an expression\\ \\ Updates in 6.05.02\\ \\ * Updates for systems using C3D rotations.\\ \\ Updates in 6.05.01\\ \\ * Under the covers major change in compiler\\ * Report editing improvements for the report tab\\ * Fix print to PDF error for staggered graphs\\ * Some changes in infrastructure for future Visual3D\\ \\ <code>\\  features.\\ </code>\\ \\ * Add Set_Pipeline_Parameter_To_List_Of_Model_Names\\ \\ <code>\\  command to assist with running model building\\  commands.\\ </code>\\ \\ * Fix Command_Signal_Cluster_Interpolate command crash\\ * Clean up model building dialogs to prepare for future\\ \\ <code>\\  features being developed\\ </code>\\ \\ * Add ThoracicCervicleAcromiumToT12 graphic object\\ * Fix Transform_Data_Coordinate_System to work with\\ \\ <code>\\  Force Plate data when using IK\\ </code>\\ \\ Updates in 6.03.07\\ \\ * Add capability to remove segments from consideration\\ \\ <code>\\  from assigning a force to it.\\ </code>\\ \\ * Some commands using a model metric sometimes do not\\ \\ <code>\\  access the model properly, fixed to be consistent\\  when multiple models are present.\\ </code>\\ \\ * Gap fill clusters using locations of the tracking\\ \\ <code>\\  markers (prototype hidden).\\ </code>\\ \\ * Fix page title when no report items exist on the page\\ * Fix CalTester to allow manual selection of the FP\\ \\ <code>\\  being tested.\\ </code>\\ \\ Updates in 6.03.06\\ \\ * Fix Metric_Event_Count when counting the last\\ \\ <code>\\  frame of a file to account for precision\\  variances.\\ </code>\\ \\ Updates in 6.03.05\\ \\ * Report item editing now returns list to same\\ \\ <code>\\  position when you selected item to edit.\\ </code>\\ \\ * Set_View_Options did not default to work the\\ \\ <code>\\  same as previous versions, corrected to allow\\  setting the background to white.\\ </code>\\ \\ * Metric folder viewing sometimes did not show\\ \\ <code>\\  all items in the folder.\\ </code>\\ \\ * Changes to Copy and Reflect Landmark to work\\ \\ <code>\\  better.\\ </code>\\ \\ * Allow model template to be applied to multiple\\ \\ <code>\\  static calibration file in Open and Append\\  commands.\\ </code>\\ \\ Updates in 6.03.04\\ \\ * Fix regression in FP Auto Baseline\\ * Fix bug to make analog synch signal visible\\ * Add edit dialog to Set_Frorce_Platform_Threshold\\ * Fix hybrid segment CG on serializing .cmz files\\ \\ <code>\\  - affects drawing of axes at CG\\ </code>\\ \\ Updates in 6.03.03\\ \\ * Fix when using rotations to determine pose.\\ * Scaling for P2D signals when using manual range.\\ * Create edit dialog for Set_Force_Platform_Threashold\\ \\ Updates in 6.03.02\\ \\ * Fix error in Metric_Signal_Value_At_Event\\ \\ Updates in 6.03.01\\ \\ * Delay load of dlls not called in Windows 7\\ \\ <code>\\  to prevent a Visual3D load error.\\ </code>\\ \\ Updates in 6.03\\ \\ * Roll up of all bug fixes and development changes\\ \\ <code>\\  in release candidates.\\ </code>\\ \\ * Set_Model_Metric command name compatibility\\ \\ <code>\\  with previous releases.\\ </code>\\ \\ Updates in 6.01.52 (release candidate)\\ \\ * Additional modifications for read only models\\ \\ <code>\\  when viewing the CMZ/CMO library of files.\\ </code>\\ \\ Updates in 6.01.51 (release candidate)\\ \\ * Fix read only library dialogs to disallow\\ \\ <code>\\  applying changes to a library model.\\ </code>\\ \\ * Fix libary display of targets in a model.\\ * Continue bug fixes for Average Filter and\\ \\ <code>\\  Set_View_Options command.\\ </code>\\ \\ Updates in 6.01.50 (release candidate)\\ \\ * New report editing interfaces to integrate\\ \\ <code>\\  various dialogs into cleaner tabbed\\  design.\\ </code>\\ \\ * COP_PATH normalization bug fix. This used\\ \\ <code>\\  to normalize ML and AP to the conical foot \\  circumference and was changed to normalize \\  only to the foot radius.\\ </code>\\ \\ * Real Time Plugin cleanup\\ * Fix crash in set data to new values.\\ * Add ALL_MODELS and ACTIVE_MODELS to\\ \\ <code>\\  Set_Model_Metric command to specify model.\\ </code>\\ \\ * Update processing results if pipeline run\\ \\ <code>\\  multiple times.\\ </code>\\ \\ * Text Data dialog bugs when resizing fix.\\ * Fix activiation bug on Windows 7\\ * Option added to force odd frames on filter\\ \\ <code>\\  commands.\\ </code>\\ \\ * Export FP and assignments from View/Modify\\ \\ <code>\\  Force Platform Assignments tab.\\ </code>\\ \\ * Modify Force Structure Parameters Speed Values\\ \\ <code>\\  were set to NAN\\ </code>\\ \\ * Fix transform data coordinate system upsample\\ \\ <code>\\  rate with IK signals.\\ </code>\\ \\ * Set view options command fixes for options which\\ \\ <code>\\  weren't working.\\ </code>\\ \\ * Fix bug moving event frames in dialog.\\ * Fixes for synchronized motion file dialog so\\ \\ <code>\\  it works better with the command.\\ </code>\\ \\ Updates in 6.01.49 (release candidate)\\ \\ * Fix control buttons on the real-time\\ \\ <code>\\  biofeedback tab.\\ </code>\\ \\ * Fix activation use of computer name\\ \\ <code>\\  to prevent duplication of mixed and\\  all upper case names.\\ </code>\\ \\ Updates in 6.01.47 (release candidate)\\ \\ * Fix rare bug causing a crash for setting\\ \\ <code>\\  analog baselines after loading a .cmz file\\  when fp_zeros are -1 on file load.\\ </code>\\ \\ * More changes in prompt for pipeline parameter\\ \\ <code>\\  value\\ </code>\\ \\ * RT fix for disconnect/reconnect\\ * Menu option to view ReadMe file.\\ \\ Updates in 6.01.45 (release candidate)\\ \\ * Allow segment colorization in synchronized\\ \\ <code>\\  motion file animation\\ </code>\\ \\ * Fix in prompt for pipeline parameter value\\ * Minor error corrected in real-time graphs\\ * Add option for Rename_Signals in cal file\\ \\ Updates in 6.01.43 (release candidate)\\ \\ * Updated video rendering for greater\\ \\ <code>\\  compatibility with video codecs.\\ </code>\\ \\ * Fix Make Line Graph command for\\ \\ <code>\\  intermediate events and exclude events\\  used with Event_Sequences\\ </code>\\ \\ * Indefinite Integral initial value fixes\\ * Event range issue when 2 events exist\\ \\ <code>\\  at the same time (rare instance).\\ </code>\\ \\ * Continued modifications in preparation of\\ \\ <code>\\  new report graph editing features.\\ </code>\\ \\ * Fix Evaluate_Expression crash for spline\\ * Software activation fix for Unicode Asian\\ \\ <code>\\  characters.\\ </code>\\ \\ * Fix missing Compute_Distance_Map command\\ \\ <code>\\  history.\\ </code>\\ \\ Updates in 6.01.41 (release candidate)\\ \\ * Fix discontinuity of joint angle X around\\ \\ <code>\\  90 degrees.\\ </code>\\ \\ Updates in 6.01.39 (release candidate)\\ \\ * Fix File Open regression in 6.01.37 for\\ \\ <code>\\  .cmo files saved between 2009-01 and \\  2010-11 versions of Visual3D.\\ </code>\\ \\ Updates in 6.01.37 (release candidate)\\ \\ * Fix digitizing pointer crash regression\\ * GCVSPL spline now handles rotations\\ * 64 bit IK precision tweak\\ * Add string_to_upper and string_to_lower\\ \\ <code>\\  expression functions\\ </code>\\ \\ * Fix consistency for IK target color animation\\ * Fix filtering crash, deny filtering for\\ \\ <code>\\  folders that shouldn't be filtered, fix\\  filter minor bug.\\ </code>\\ \\ * Tweak to handling of graph tick marks.\\ * New real time Metric_Maximum command\\ * LINK_MODEL_BASED GRF_DATA now set to zero,\\ \\ <code>\\  instead of NAN when no force present.\\ </code>\\ \\ Updates in 6.01.36\\ \\ * Fix crash when event referenced in an\\ \\ <code>\\  event sequence is empty (Performance fix\\  regression).\\ </code>\\ \\ Updates in 6.01.35\\ \\ * Fix crash obtaining event ranges when\\ \\ <code>\\  one of the events exists, but is empty.\\ </code>\\ \\ * Code infrastructure changes for\\ \\ <code>\\  standardization\\ </code>\\ \\ * Lowpass Filter error reporting update\\ \\ <code>\\  for maximum cutoff frequency\\ </code>\\ \\ * Modifications for synchronized motion\\ \\ <code>\\  files (and library capability).\\ </code>\\ \\ * Popup command wizard fix for recognizing\\ \\ <code>\\  the correct pipeline.\\ </code>\\ \\ * Fix for CalTester target residuals being\\ \\ <code>\\  graphed.\\ </code>\\ \\ Updates in 6.01.34\\ \\ * Fix marker highlight in Model Building\\ \\ <code>\\  regression for segment calibration\\  markers.\\ </code>\\ \\ * Fix segment dialog for rotations.\\ * Remove warning for Make_Line_Graph\\ \\ <code>\\  when event sequence not used.\\ </code>\\ \\ * Map segment & muscle color modified to\\ \\ <code>\\  use default active model.\\ </code>\\ \\ * Set_Scale_Of_Objects command added.\\ \\ Updates in 6.01.33\\ \\ * Helical Angle fix for when resolution\\ \\ <code>\\  coordinate system is set.\\ </code>\\ \\ * Set Animate Multiple File changes\\ * Allow export of Force assignments\\ * Allow import of TEXT_DATA from\\ \\ <code>\\  ASCII file.\\ </code>\\ \\ Updates in 6.01.32\\ \\ * Fix regression for edit graph for\\ \\ <code>\\  start and stop event.\\ </code>\\ \\ Updates in 6.01.31\\ \\ * Fix precision issue exporting to ASCII\\ \\ <code>\\  files\\ </code>\\ \\ * Add Event_Sequences support for all\\ \\ <code>\\  commands and graphs.\\ </code>\\ \\ * Add a bat object\\ * Fixed synchronized scene for multiple\\ \\ <code>\\  models\\ </code>\\ \\ * Misc Kinatrax changes\\ * Filter cutoff for 6DOF segments\\ * Fix crash in saving model template\\ * Allow breakpoint text to be TEXT_DATA\\ \\ <code>\\  signal\\ </code>\\ \\ * Fix default folder on Import ASCII to\\ \\ <code>\\  be null string, not .txt\\ </code>\\ \\ Updates in 6.01.30\\ \\ * Fix position of report page title to\\ \\ <code>\\  account for margin changes\\ </code>\\ \\ * Fix pipeline breakpoint dialog to\\ \\ <code>\\  allow for more text to be displayed\\ </code>\\ \\ * Fix command to load RT pipeline to\\ \\ <code>\\  lock shared resources to prevent\\  crash\\ </code>\\ \\ * Camera tracking tweaks\\ * Modify label scaling in reports\\ * Allow selecting a line on a graph in the\\ \\ <code>\\  report tab when animating\\ </code>\\ \\ * Allow event_sequence when exporting dat\\ \\ <code>\\  to an ASCII file\\ </code>\\ \\ Updates in 6.01.29\\ \\ * Fix performance issue with event sequences\\ * Add animation frame line to report graphs\\ * Add legend option to view graph line value\\ \\ <code>\\  when viewing animation in report mode\\ </code>\\ \\ * Fix bug which can create duplicate event\\ \\ <code>\\  timestamps at the same frame\\ </code>\\ \\ * Fix animation banner visibility\\ * Fix event sequence export to ASCII bug\\ * Fix command to attach camera to segment\\ \\ \\ Updates in 6.01.28\\ \\ * Real Time resource leak causing freezes and\\ \\ <code>\\  crashes\\ </code>\\ \\ Updates in 6.01.27\\ \\ * Handle missing data when exporting report\\ \\ <code>\\  item to text file\\ </code>\\ \\ * Formatting of report text size tweaks\\ * Add Frame_Count function to Evaluate_Expression\\ \\ <code>\\  to return the number of frames in a signal\\ </code>\\ \\ * Fix explicit frame numbers when specifying a\\ \\ <code>\\  frame in an expression to handle it being\\  1 based\\ </code>\\ \\ Updates in 6.01.26\\ \\ * Allow setting pipeline parameter to a\\ \\ <code>\\  file's folder path.\\ </code>\\ \\ * Colormap updates, including the ability\\ \\ <code>\\  to set fixed range colormaps to standardize\\  the colormap used to color animation objects.\\ </code>\\ \\ * Fix obscure bug displaying the Center of\\ \\ <code>\\  Gravity of segments when opening saved\\  .cmz files and the coordinate system is\\  not Z up, and when the option is selected\\  to draw the axis at the center of the segment.\\ </code>\\ \\ * Allow explicit frame range for the SNIP\\ \\ <code>\\  expression.\\ </code>\\ \\ * FILE_OPEN fix for .vnd files.\\ * Dialog item user interface tweaks for\\ \\ <code>\\  several commands.\\ </code>\\ \\ * Fix crash for certain sequences of navigation\\ \\ <code>\\  through model muscle dialogs.\\ </code>\\ \\ * Change behavior of expression or operator |\\ \\ <code>\\  to better handle NAN.\\ </code>\\ \\ Updates in 6.01.25\\ \\ * Fixed regression in opening VND files\\ \\ <code>\\  caused an invalid error message to appear \\  and the file not opened.  \\ </code>\\ \\ Updates in 6.01.24\\ \\ * 64 bit Matlab version support\\ \\ Updates in 6.01.23\\ \\ * Fix missing View Kinematic Only Segments\\ \\ <code>\\  property read from registry.\\ </code>\\ \\ * Update viewer when selecting tracking\\ \\ <code>\\  markers in Model Builder\\ </code>\\ \\ * Fis background color of RT graphs for\\ \\ <code>\\  threshold when selecting default\\ </code>\\ \\ * Changed interpretation of legacy treadmill\\ \\ <code>\\  direction\\ </code>\\ \\ * Fix digitizing post processing crash\\ * Display Signal Stats data header fix for\\ \\ <code>\\  quick view\\ </code>\\ \\ * Fix getting filenames from disk for extra\\ \\ <code>\\  items returned in rare scenarios.\\ </code>\\ \\ * Fix Evaluate_Expression crash\\ * Force a recalc when saving and motion\\ \\ <code>\\  file segments are out of synch with model\\ </code>\\ \\ * Avoid pelvis gimbal lock during follow\\ \\ <code>\\  through using Z-X-Y\\ </code>\\ \\ Updates in 6.01.22\\ \\ * Fix timestamps when only analog channels\\ \\ <code>\\  streamed.\\ </code>\\ \\ Updates in 6.01.21\\ \\ * Fix real time crash editing real time\\ \\ <code>\\  pipeline while streaming\\ </code>\\ \\ * Fix baseline changes in\\ \\ <code>\\  Modify_Analog_Parameters command.\\ </code>\\ \\ * Fix using reduced FP min in\\ \\ <code>\\  Auto_FP_Baseline command\\ </code>\\ \\ * Fix time offset in Event_Copy command\\ * Fix crash when .cmz file is saved\\ \\ <code>\\  after modifying the number of segments\\  in the model, but without applying the\\  model to the motion files.\\ </code>\\ \\ * Backward compatibility fix for .cmz\\ \\ <code>\\  segment residual to prevent crash when\\  reading new .cmz files in older Visual3D.\\ </code>\\ \\ Updates in 6.01.20\\ \\ * Basic filtering BETA added to realtime\\ * Several minor bugs fixed in the RT\\ \\ <code>\\   Biofeedback processing\\ </code>\\ \\ Updates in 6.01.19\\ \\ * Fix segment residual for last frame of data\\ \\ <code>\\  read by .cmz files.\\ </code>\\ \\ * Fix minor recent file list issue.\\ * Create Analog Rate parameter if missing\\ \\ Updates in 6.01.18\\ \\ * Fix Spline/Snip commands for P2D data.\\ * Allow graphing of 1 component P2D data.\\ \\ Updates in 6.01.17\\ \\ * Fix .cmz file open regression of files\\ \\ <code>\\  with a lot of events.\\ </code>\\ \\ * Fix Set_Data_To_New_Values to work with P2D\\ \\ <code>\\  data\\ </code>\\ \\ * Fix RT bar graph quirks\\ * Fix reading Matfiles with extra unexpected\\ \\ <code>\\  variables that are not cell arrays\\ </code>\\ \\ * Save model template fix for IK rotation axes\\ * Allow deleting data with blank signal name\\ * Fix quirks with drawing the floor\\ \\ Updates in 6.01.16\\ \\ * Processing results performance changes and\\ \\ <code>\\  fix display settings.\\ </code>\\ \\ * Allow the user to set default results settings\\ \\ <code>\\  and temporary ones for the current pipeline\\  by command.\\ </code>\\ \\ * Allow P2D data for Set_Data_To_New_Values\\ \\ <code>\\  command.\\ </code>\\ \\ * Add @Eval( ) for special cases for command\\ \\ <code>\\  parameters.\\ </code>\\ \\ * Fix exporting more than 255 events.\\ * Fix analog scale when set to NaN.\\ * Save paper size to .cmo/z files.\\ * Fix IK for a 1 segment link.\\ * Fix Export_Line_Graph_Pipeline components.\\ \\ Updates in 6.01.15\\ \\ * Fix uninitialized variable and consolidate\\ \\ <code>\\  duplicated information internally.\\ </code>\\ \\ Updates in 6.01.14\\ \\ * Enhance internal pipeline command\\ \\ <code>\\  restrictions for Reckon3D\\  compatibility\\ </code>\\ \\ Updates in 6.01.13\\ \\ * Fix View_Processing_Results command\\ * Fix regression setting 'time' to 'frames'\\ \\ <code>\\  in report graphs\\ </code>\\ \\ * Fix Cross_Product obscure components bug.\\ \\ Updates in 6.01.12\\ \\ * Add RT graph options for custom title, center\\ \\ <code>\\  the title.\\ </code>\\ \\ * Add RT option to remove Y axis label from\\ \\ <code>\\  biofeedback graphs\\ </code>\\ \\ * Fix popups error unprotecting a folder\\ * Fix report legend on staggered graphs\\ * Fix error loading an interactive graph layout\\ \\ Updates in 6.01.11\\ \\ * Tweak real time bar graph spacing and size.\\ * CalTester bug with target data in meters.\\ * Fix export C3D file with landmarks bug.\\ * Fix export C3D file bug when first frame\\ \\ <code>\\  is > 1.\\ </code>\\ \\ * Fix kinematic only Helen Hayes pelvis.\\ * Fix real time color representation in\\ \\ <code>\\  graph dlg.\\ </code>\\ \\ Updates in 6.01.10\\ \\ * Fix report annotations error with average event\\ * Fix Copy Event dialog which changed new event\\ \\ <code>\\  to upper case.\\ </code>\\ \\ Updates in v6.01.09\\ \\ * Handle Frames/Time in Realtime\\ * Fix signal folder selection in report graph\\ \\ <code>\\  dialog\\ </code>\\ \\ * Add RT Scroll direction change option for RT graphs\\ * Allow RT Bar graph color change using line color\\ * Add option to view segment lines as cylinders\\ * Fix Resolve_Discontinuity issue with 1st frame\\ * Fix IK dependency order build issue\\ \\ Updates in v6.01.08\\ \\ * Fix report crash when annotations index into signal\\ \\ <code>\\  beyond the frames contained in the signal.\\ </code>\\ \\ * Fix bar graph flicker in realtime\\ * Fix realtime FPS processing of Evaluate_Expression.\\ * Tweaks to OpenGL animation\\ \\ Updates in v6.01.07\\ \\ * Fix landmark updates when segment location updates\\ \\ <code>\\  for IK in the static model.\\ </code>\\ \\ * Pause when printing from a script in order to\\ \\ <code>\\  prevent issues when printting page changes.\\ </code>\\ \\ * Fix asci file target scaling for some files.\\ * Fix Metric_Event_Sequence_Count\\ \\ Updates in v6.01.06\\ \\ * Fix custom segment mass expression from reverting\\ \\ <code>\\  to default expression when using a default \\  geometry after you modify subject mass.\\ </code>\\ \\ * Revert GCVSPL behavior back to 6.01.03 behavior.\\ * Tweaks to Matlab engine interface to see if it\\ \\ <code>\\  fixes some obscure message from popping up for\\  some users.\\ </code>\\ \\ * Fix Set Data To New Value for analog subframes\\ * Fix Remove_Prefix_From_Point_Labels when a bad\\ \\ <code>\\  prefix parameter is specified.  Fix modifying\\  the static trial when no motion file is assigned\\  to it.\\ </code>\\ \\ * Add a Create_Rotation command\\ * Add segment selection to Compute_Planar_Angle\\ \\ <code>\\  dialog.\\ </code>\\ \\ * Fix Append_Model_Template for IK Chains that\\ \\ <code>\\  have segments that already exist in the model.\\ </code>\\ \\ * Update recent path when there is an error with\\ \\ <code>\\  the file opened, you probably want to go to that\\  path again to select the correct file.\\ </code>\\ \\ Updates in v6.01.05\\ \\ * Fix obscure model building error introduced in\\ \\ <code>\\  6.01.04\\ </code>\\ \\ Updates in v6.01.04\\ \\ * Performance tweaks\\ * Fixes in the Mayo Functional Joints algorithm\\ * Fix multithreading crash\\ * Continued IOR_Quality_Assurance modifications\\ * Fix copy and reflect, or copy segment when\\ \\ <code>\\  segment is not using default SCS\\ </code>\\ \\ * Add Metric_Interquartile_Range command and\\ \\ <code>\\  expression\\ </code>\\ \\ * Change expression integration commands to\\ \\ <code>\\  Indefinite_Integral and Metric_Integrate. \\  Also changed metric expression commands to\\  use the prefix "Metric_" to clarify expressions.\\ </code>\\ \\ * Fix exit real time crash when streaming\\ * Fix SVG axis labels\\ * Export animation frame fixes\\ * New command to draw poly lines around a point in\\ \\ <code>\\  real time\\ </code>\\ \\ * Infrastructure changes for processing results\\ \\ Updates in v6.01.03\\ \\ * Performance tweaks\\ * Update Opensim default to 2.3\\ * Fix Modify_Force_Structures crash\\ * Fix Edit_Report_Text dialog bug\\ * IOR_Quality_Assurance command availability\\ * Functional Joints Definition dialog modifications\\ * C3D file fix for customer's erroneous C3D file so\\ \\ <code>\\  it can be read and fixed.\\ </code>\\ \\ * Menu Settings option to turn multi threading\\ \\ <code>\\  on or off for Visual3D.\\ </code>\\ \\ Updates in v6.01.02\\ \\ * Fix drawing floor when no model file is given\\ * Fix balloon text expression information in\\ \\ <code>\\  saved .cmz files\\ </code>\\ \\ * Real time color changes in graphs for target range\\ * Real time temporal and distance metric creation\\ \\ <code>\\  which prevented use in bar charts\\ </code>\\ \\ Updates in v6.01.01\\ \\ * Fix balloon text saved to a file which requires\\ \\ <code>\\  expression evaluation\\ </code>\\ \\ * Fix slow loading of Kinatrax files\\ * Fix Real Time graphs when transitioning to lower\\ \\ <code>\\  threshold colors of yellow and red lines\\ </code>\\ \\ * Add Real Time biofeedback command for\\ \\ <code>\\  Biofeedback_Show_Image_In_Range\\ </code>\\ \\ * Include missing .dll required for 64 bit Matlab\\ \\ Updates in v6.01.00\\ \\ * Real Time performance and functionality\\ \\ <code>\\  improvements\\ </code>\\ \\ * Matlab now available in 64 bit, with new and\\ \\ <code>\\  real time interfaces to put and eval directly\\  to the Matlab workspace\\ </code>\\ \\ * Numerous fixes and tweaks.\\ * Evaluate_Expression function additions for\\ \\ <code>\\  Metric_Integrate, Metric_Sum\\ </code>\\ \\ * Bring back old Functional Joints Post Processing\\ \\ <code>\\  abilities that went away in v6.\\ </code>\\ \\ * Visual3D Server interface issues dealing with\\ \\ <code>\\  force platforms and scaling\\ </code>\\ \\ * New IOR Quality Assurance command\\ \\ Updates in v6.00.34\\ \\ * Support for Kinatrax file format change.\\ * Add Next and Previous Warning buttons to\\ \\ <code>\\  processing results\\ </code>\\ \\ * Specify size (or null) for a landmark in the\\ \\ <code>\\  3D animation window.\\ </code>\\ \\ * Fix to export landmark when target of the same\\ \\ <code>\\  name contains no data.\\ </code>\\ \\ * Fix for automatic gait TPR to use first good\\ \\ <code>\\  ON and OFF events when first occurance is too\\  close to the start, or end of a file to perform\\  TPR.\\ </code>\\ \\ Updates in v6.00.33\\ \\ * Fix units conversion issue when interfacing\\ \\ <code>\\  with Visual3D RT Server.\\ </code>\\ \\ * Fix SVG export of report to include labels\\ * Fix NAN handling issue in certain expressions\\ \\ Updates in v6.00.32\\ \\ * Realtime fix for crash that occurs with\\ \\ <code>\\  specific licensing configurations\\ </code>\\ \\ * Report image resolution fix for high\\ \\ <code>\\  quality image display\\ </code>\\ \\ Updates in v6.00.31\\ \\ * Fix custom geometry CODA pelvis inertial\\ \\ <code>\\  properties when saving and loading a file.\\ </code>\\ \\ Updates in v6.00.30\\ \\ * Fixed graphics model object\\ * Fix landmark creation with deep dependencies\\ * Remove Signals for analog, update force platform\\ \\ Updates in v6.00.29\\ \\ * Assorted CalTester bugs fixed\\ * Force Structure update bug fixed\\ \\ Updates in v6.00.28\\ \\ * Fix user interface issues for encrypted data.\\ * CalTester, fix assorted bugs\\ * Force Structure processing in real-time..\\ \\ Updates in v6.00.27\\ \\ * Add Best_Fit_Sphere function to expressions.\\ * Fix Expression RAND function to be more random.\\ * Fix Remove_Signals command for no active files\\ \\ <code>\\  and for model files.\\ </code>\\ \\ Updates in v6.00.26\\ \\ * Performance fix for exporting high frame graph\\ * Improve defaults on File Save when closing files\\ * Make_Text_Annotations expressions\\ * Fix crash deleting a CODA pelvis\\ * Fix First_Frame when long integer used\\ \\ Updates in v6.00.25\\ \\ * Fix legends being drawn underneath graph lines\\ \\ <code>\\  (make work like they were drawn in v5)\\ </code>\\ \\ * Update pipeline processing window when open.\\ * Fix Auto FP Baseline when -Y is up.\\ * Prompt for file save when closing C3D files.\\ \\ Updates in v6.00.24\\ \\ * Fix CMO File open crash due to recalc pipeline\\ \\ <code>\\  stack overflow problem.\\ </code>\\ \\ * Fix getting the number of elements from a CMZ\\ \\ <code>\\  Library.\\ </code>\\ \\ Updates in v6.00.23\\ \\ * Fix crash in Set_Pipeline_Parameter_To_Data\\ \\ <code>\\  when using C3D Parameters.\\ </code>\\ \\ Updates in v6.00.22\\ \\ * Fix command to File_Open_CalTester_File\\ \\ <code>\\  when a file is named in the command.\\ </code>\\ \\ * Fix dialog to modify force structures.\\ \\ Updates in v6.00.21\\ \\ * Revert 'Condition_Statement' to act as\\ \\ <code>\\  'Expression_Loop' used to behave.\\ </code>\\ \\ * Fix activation for users who had a v6 evaluation\\ \\ <code>\\  installed before purchasing.\\ </code>\\ \\ * Allow Set_Pipeline_Parameter_To_Data_Value to use\\ \\ <code>\\  Text data.\\ </code>\\ \\ * Fix for Export_Line_Graph_Pipeline\\ * Fix Export_C3D_File when no files are active\\ \\ Update in v6.00.20\\ \\ * Fix CODA Pelvis dialog\\ * Fix bug in Add_Graph_Annotation from pipeline.\\ * Updated a few command dialogs\\ * Fix Conditional_Statement from appearing as though\\ \\ <code>\\  it executes twice in processing results.\\ </code>\\ \\ Update in v6.00.19\\ \\ * Fix for French language crash.\\ * Tweak printed bold lines to show up properly.\\ \\ Updates in v6.00.18\\ \\ * XSens mvnx compatibility fix\\ * Convert Pelvis segment type between types\\ \\ <code>\\  (CODA, V3D_Hybrid, etc).\\ </code>\\ \\ * Kinatrax model changes to match data in .csv file\\ * Feature to create FP surface corners from FP corners\\ * Expression compatibility fix for certain component\\ \\ <code>\\  access formats\\ </code>\\ \\ * Modify copy and reflect to work with more segment\\ \\ <code>\\  name formats (ie; L/R at end of name)\\ </code>\\ \\ Updates in v6.00.17\\ \\ * Fix crash reading .cmz/.cmo files with Helen Hayes\\ \\ <code>\\  pelvis\\ </code>\\ \\ * Fix Functional Joints/post processing crash\\ \\ Updates in v6.00.16\\ \\ * Fix Multiply_Signal_By_Constant to not crash when an\\ \\ <code>\\  element is specified that doesn't exist in the signal.\\ </code>\\ \\ * Fix Call_Script with a breakpoint so it can be resumed\\ \\ <code>\\  properly.\\ </code>\\ \\ Updates in v6.00.15\\ \\ * Conditional_Statement command made available\\ * Fix validation of Export_Graph command\\ * Fix file handling in Metric Compute Elipse command\\ * Fix bug exporting OpenSim using a front to back treadmill\\ * Fix calling a breakpoint from within a meta-command\\ \\ What's New in v6.00\\ \\ * 64 bit support\\ * Multithreaded processing to take full advantage of\\ \\ <code>\\  multicore processors.\\ </code>\\ \\ * CMZ file format to support fast file open times, and\\ \\ <code>\\  model access and processing from the CMZ library\\ </code>\\ \\ * Library segment animation, library model viewing and\\ \\ <code>\\  library Link_Model_Based calculation capability\\ </code>\\ \\ * Performance improvements throughout delivers very\\ \\ <code>\\  high performance model and data computations.\\ </code>\\ \\ * Incorporate CalTester+ force platform corner location\\ \\ <code>\\  functionality into Visual3D\\ </code>\\ \\ * IK Motion Constraints & Boundary Conditions\\ * Enhanced graphs with smoother lines (fix for print to\\ \\ <code>\\  PDF should work for dotted lines)\\ </code>\\ \\ * Syntax color coded text editor (pipeline)\\ * Modeless dialogs for Force Assignments & Force\\ \\ <code>\\  Platform Parameters\\ </code>\\ \\ * Query added to report items\\ \\ <code>\\  (examples using metrics and text data)\\ </code>\\ \\ * Copy Landmark Button\\ * New Commands:\\ \\ <code>\\  - Event threshold parameter added for all maximum and \\    minimum commands (Event & Metric)\\  - FP Auto Baseline for improved treadmill force results\\  - Locate Force Platform Corners\\  - Reset Segment Assignment to Force and COP\\  - Compute Confidence Ellipse (old name Compute \\    Trajectory Ellipse)\\  - Get Pipeline Parameter Index Value\\  - Expression Loop (now Conditional_Statement)\\  - New biofeedback animation commands\\  - Export Signals to XML Graph\\  - Set Text Item to store text information\\  - Commands to secure data by the use of \\    Folder Encryption\\ </code>  |
+=== Functional Changes ===
 |     Visual3D v6 - older updates                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         |