other:dsx:plandsx:motion_capture_cameras
Table of Contents
Motion Capture Cameras
PlanDSX accounts for the cameras that are a part of the motion-capture system. In the 3D view they are represented by a small box (the camera body) and a semi-transparent cone (the field of view). You can place any number of them in the scene and specify the length and radius of the field of view.
Adding and Removing Cameras
To add a motion capture camera to the scene, press the Add button. PlanDSX will add a camera with default parameters pointed at the origin. You can then change its properties using the table and move it in the 3D view. To delete a camera, select it in the table and press the Remove button.
Camera Properties
| Property | Description |
|---|---|
| Name | When a new camera is created it is given a default name with the format Camera (1), Camera (2) … Camera (N). To change this name double-click on it and type in a new name. |
| Length | The length of the cone representing the field of view. To change the length double-click on it and enter a new value. |
| Radius | The radius of the end of the cone representing the field of view. To change the radius double-click on it and enter a new value. |
| Visibility | This checkbox toggles the visibility of the motion capture camera in the 3D view. |
| Color | The colour of the camera body and field of view in the 3D view. To change the colour, double-click on the colour box and select a new colour. |
References
other/dsx/plandsx/motion_capture_cameras.txt · Last modified: 2025/01/10 21:30 by wikisysop