Landmark Type 7

From Software Product Documentation
Revision as of 17:36, 27 March 2014 by Wikisysop (talk | contribs) (Created page with "Below shows how one would create a landmark Relative to the Global Coordinate System (Lab). In this case, a landmark called '''Ostacle_Top_Surface''' is created relative to th...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Below shows how one would create a landmark Relative to the Global Coordinate System (Lab). In this case, a landmark called Ostacle_Top_Surface is created relative to the Lab's coordinate system with offsets of 0.0 for X, 0.7 for Y, and 0.45 for Z. These offsets are in metres.

Landmark Name: Ostacle_Top_Surface
Starting Point:
Define Orientation Using:
Check Existing Segment: Lab
Landmark Offset from Start Point or Segment Origin
Offset Using the Following ML/AP/AXIAL Offsets
X=0.0
Y=0.7
Z=0.45
Do Not Check Offset By Percent
Do Not Check Calibration Only Landmark
Retrieved from ""